Journal of Pressure Vessel Technology: Recent submissions
Now showing items 4161-4180 of 4506
-
Elastic Thermal Stresses in Bimetallic Pipe Welds
(The American Society of Mechanical Engineers (ASME), 1980)The elastic thermal stresses in a welded transition between two pipes of the same size but different alloys are explored. A stress-free temperature is postulated and the stress due to a uniform ... -
The Effects of Geometric Irregularities on the Design Analysis of Thin-Walled Piping Elbows
(The American Society of Mechanical Engineers (ASME), 1980)Geometric irregularities, such as ovality, in thin-walled elbows are known to give additional stresses under internal pressure loading. This paper presents results of detailed analyses, using the ... -
Simplified Inelastic Analysis Methods for Bounding Fatigue and Creep Rupture Damage
(The American Society of Mechanical Engineers (ASME), 1980)Bounds on inelastic strain ranges and maximum residual stresses introduced by transient operating conditions are obtained. These strain ranges and maximum residual stresses can be used to determine ... -
Comparison of Experimental and Simplified Analytical Results for the In-Plane Plastic Bending and Buckling of an Elbow
(The American Society of Mechanical Engineers (ASME), 1980)Predictions obtained from a simplified finite element analysis are compared with experimental results on the plastic in-plane bending and buckling of a 16-in-dia Type 304 stainless steel piping ... -
Stress and Strain Concentrations in Perforated Structures Under Steady Creep Conditions
(The American Society of Mechanical Engineers (ASME), 1980)Steady creep solutions are obtained for perforated materials under various loading conditions. Norton’s creep power law is used and the plane stress problem is analyzed for both the triangular ... -
Prediction of Random High-Cycle Fatigue Life of LWR Components
(The American Society of Mechanical Engineers (ASME), 1980)This state-of-the-art review identifies and discusses the existing methods of predicting the high-cycle fatigue life, their limitations, and base-technology needs. The cycle stress-strain approach ... -
Fluid Mass Matrices for Thin Shell-of-Revolution Tanks
(The American Society of Mechanical Engineers (ASME), 1980)This paper presents the equations for thin shell-of-revolution tanks containing an arbitrary level of fluid. The mass matrix can be used with any finite element or finite difference digital ... -
The Enriched Element for Finite Element Analysis of Three-Dimensional Elastic Crack Problems
(The American Society of Mechanical Engineers (ASME), 1980)An improved procedure for enriching three-dimensional isoparametric elements with the asymptotic crack front solution is described. Results from finite element calculations, involving these enriched ... -
Design and Analysis of Multispan Straight Tubes for Elevated Temperature Heat Exchanger Service
(The American Society of Mechanical Engineers (ASME), 1980)The behavior of multispan SS304 tubes intended for elevated temperature heat exchanger service is investigated. Particular attention was paid to the ASME Code Case 1592 criteria on buckling. It ... -
Acoustic Emission Testing During a Burst Test of a Thick-Walled 2-1/4 Cr-1 Mo Steel Pressure Vessel
(The American Society of Mechanical Engineers (ASME), 1980)The applicability of AET to pressure vessels made of 2 1/4 Cr-1 Mo steel was studied by an extensive program which included: 1) a hydrostatic test of a test vessel with weld discontinuities, ... -
Creep Analysis of Orthotropic Rotating Cylinder
(The American Society of Mechanical Engineers (ASME), 1980)The stress and strain-rate distributions in the wall of a hollow thick-walled circular cylinder, rotating about its own axis with a constant angular speed, have been obtained using Norton’s law ... -
Technical Basis for Revised Reference Crack Growth Rate Curves for Pressure Boundary Steels in LWR Environment
(The American Society of Mechanical Engineers (ASME), 1980)Reference fatigue crack growth rate curves have been contained in Appendix A of Section XI since its inception. The curves have been designed to be applicable to carbon and low alloy pressure ... -
Stress-Intensity Factors for Internal Surface Cracks in Cylindrical Pressure Vessels
(The American Society of Mechanical Engineers (ASME), 1980)The purpose of this paper is to present stress-intensity factors for a wide range of semi-elliptical surface cracks on the inside of pressurized cylinders. The ratio of crack depth to crack ... -
A Damage-Tolerant Design and Inspection Philosophy for Nuclear and Other Pressure Vessels
(The American Society of Mechanical Engineers (ASME), 1980)Statistical analyses of pressure vessel failure rates indicate that, to date, the record is very good. However, the public hazard and environmental consequences of failure in certain industrial ... -
Errata: “An LEFM Analysis for the Effects of Weld-Repair-Induced Residual Stresses on the Fracture of the HSST ITV-8 Vessel” (Journal of Pressure Vessel Technology, 102, pp. 318–323) and “An Analysis Procedure for Predicting Weld Repair Residual Stress in Thick-Walled Vessels” (Journal of Pressure Vessel Technology, 102, pp. 323–331)
(The American Society of Mechanical Engineers (ASME), 1980) -
Implosion Analysis of Concrete Cylindrical Vessels
(The American Society of Mechanical Engineers (ASME), 1979)Concrete constitutive relations which can simulate the overall material behavior up to and including its ultimate state under general triaxial loading conditions have been developed. The proposed ... -
A Note on the Gross Correction for Noncircular Inelastic Pipe Bends Under In-Plane Bending
(The American Society of Mechanical Engineers (ASME), 1979) -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1979) -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1979) -
Technical Editor’s Page
(The American Society of Mechanical Engineers (ASME), 1979)