Journal of Pressure Vessel Technology: Recent submissions
Now showing items 3661-3680 of 4506
-
Fluid Structure Vibration and Liquid Sloshing (ASME Special Publication PVP-Vol. 128)
(The American Society of Mechanical Engineers (ASME), 1987) -
The Plastic Ratcheting of Thin Cylindrical Shells Subjected to Axisymmetric Thermal and Mechanical Loading
(The American Society of Mechanical Engineers (ASME), 1987)The paper discusses the relationship between material properties and structural ratcheting for thin cylindrical shells subjected to severe thermal loading. The need to understand this problem ... -
Notch Ductility Requirements of Line Pipes for Arresting Propagating Shear Fracture
(The American Society of Mechanical Engineers (ASME), 1987)Full-scale burst tests were carried out on X70 line pipes, 48 in. o. d. × 0.720 in. w. t., with air and rich and natural gas as the pressurizing gases. The experimental results indicated ... -
Seismic Engineering (ASME Special Publication PVP-Vol. 127)
(The American Society of Mechanical Engineers (ASME), 1987) -
Buckling at the Top of a Fluid-Filled Tank During Base Excitation
(The American Society of Mechanical Engineers (ASME), 1987)An explanation is provided for the earthquake-induced damage observed at the top of liquid storage tanks. An analysis is developed and the results are compared with experimental work. The basic ... -
Pressure Vessel and Piping Technology: Two Decades of Progress and Future Challenges
(The American Society of Mechanical Engineers (ASME), 1987)The organizational and technological advances of the last two decades in the U.S. Pressure Vessel and Piping (PVP) Technology are first traced. Highlights of growth in the major organizations ... -
Theory and Design of Pressure Vessels
(The American Society of Mechanical Engineers (ASME), 1987) -
A Rational Design of Thin-Walled Pressure Vessel Ends
(The American Society of Mechanical Engineers (ASME), 1987)Optimal contours for heads of cylindrical pressure vessels are discussed. As opposed to the common method of preventing buckling in pressure vessel ends by means of increased wall thickness or ... -
Buckling Design Criteria for Waste Disposal Containers
(The American Society of Mechanical Engineers (ASME), 1987)This report documents analytical and experimental results from a survey of the technical literature on buckling of thick-walled cylinders under external pressure. Based upon these results, a load ... -
Thermal Stress, Material Deformation, and Thermo-Mechanical Fatigue (ASME Special Publication PVP-Vol. 123)
(The American Society of Mechanical Engineers (ASME), 1987) -
Computer-Aided Engineering Applications (PVP-Vol. 126)
(The American Society of Mechanical Engineers (ASME), 1987) -
Recent Advances in Structural Dynamics (ASME Special Publications PVP-Vol. 124)
(The American Society of Mechanical Engineers (ASME), 1987) -
Design and Analysis of Piping, Pressure Vessels, and Components (ASME Special Publication PVP-Vol. 120)
(The American Society of Mechanical Engineers (ASME), 1987) -
High Pressure Engineering and Technology (ASME Special Publication PVP-Vol. 125)
(The American Society of Mechanical Engineers (ASME), 1987) -
Flow-Induced Vibrations—1987 (ASME Special Publication PVP-Vol. 122)
(The American Society of Mechanical Engineers (ASME), 1987) -
Design and Analysis of Composite Material Vessels (ASME Special Publication PVP-Vol. 121)
(The American Society of Mechanical Engineers (ASME), 1987) -
Performance and Evaluation of Light Water Reactor Pressure Vessels (ASME Special Publication PVP-Vol. 119)
(The American Society of Mechanical Engineers (ASME), 1987) -
The Bauschinger and Hardening Effect on Residual Stresses in an Autofrettaged Thick-Walled Cylinder
(The American Society of Mechanical Engineers (ASME), 1986)Most of the earlier solutions for residual stresses were based on the assumption of elastic unloading and only a few considered reverse yielding. In this paper a new theoretical model for a ... -
Strain Distributions in a Type 316/16-8-2 Stainless Steel Weldment During Cyclic Loading
(The American Society of Mechanical Engineers (ASME), 1986)Test specimens were cut from a 25-mm-thick Type 316 stainless steel plate butt welded with 16-8-2 filler wire. The specimens were oriented transverse to the weld seam and contained base metal, ... -
Material Behavior Under Thermal Loading
(The American Society of Mechanical Engineers (ASME), 1986)Material behavior under thermo-mechanical and isothermal loading cases is studied. The influence of constraint on thermo-mechanical deformation behavior is identified using a two-bar structure. Some ...