Journal of Engineering for Gas Turbines and Power: Recent submissions
Now showing items 5381-5400 of 9564
-
Impingement Cooling of Concave Surfaces With Lines of Circular Air Jets
(The American Society of Mechanical Engineers (ASME), 1969)An experimental study of the heat transfer characteristics between single lines of circular jets and concave cylindrical surfaces is presented. It is intended to model a practically important ... -
A Resonant Beam Tuned Damping Device
(The American Society of Mechanical Engineers (ASME), 1969)A resonant beam tuned damping device, comprising a flexible beam joined by way of visco-elastic links at the ends, to a vibrating structure, is described. This device has the advantage of ... -
Discussion: “Radioactive Sulfur Oxide Studies of External Corrosion Reactions on Surfaces” (Krause, H. H., Levy, A., and Reid, William T., 1969, ASME J. Eng. Power, 91, pp. 216–220)
(The American Society of Mechanical Engineers (ASME), 1969) -
Discussion: “Massive Recirculation as a Method of Minimizing Corrosion in the Combustion of Residual Fuels” (Reba, Imants, 1969, ASME J. Eng. Power, 91, pp. 198–205)
(The American Society of Mechanical Engineers (ASME), 1969) -
Discussion: “Alkali Iron Trisulfate Formation Within Deposits in an Oil-Fired Laboratory Combustor” (Barrett, R. E., 1969, ASME J. Eng. Power, 91, pp. 173–180)
(The American Society of Mechanical Engineers (ASME), 1969) -
Discussion: “Optimization of Heater Design Conditions in Power Plant Cycles” (Salisbury, J. Kenneth, 1969, ASME J. Eng. Power, 91, pp. 159–170)
(The American Society of Mechanical Engineers (ASME), 1969) -
Discussion: “Impingement Cooling of Concave Surfaces With Lines of Circular Air Jets” (Metzger, D. E., Yamashita, T., and Jenkins, C. W., 1969, ASME J. Eng. Power, 91, pp. 149–155)
(The American Society of Mechanical Engineers (ASME), 1969) -
Discussion: “A Resonant Beam Tuned Damping Device” (Nashif, A. D., and Jones, D. I. G., 1969, ASME J. Eng. Power, 91, pp. 143–147)
(The American Society of Mechanical Engineers (ASME), 1969) -
A Design Method for Oblique-Flow Headers for Heat Exchangers
(The American Society of Mechanical Engineers (ASME), 1969) -
Current Status of Titanium-Boron Composites for Gas Turbines
(The American Society of Mechanical Engineers (ASME), 1969)A process to manufacture titanium-boron composites has been demonstrated with a 30-filament tape in which reaction is controlled to a few hundred Angstroms of boride. This tape has good ... -
Air Pollution Characteristics of Gas Turbine Engines
(The American Society of Mechanical Engineers (ASME), 1969)The current contribution of gas turbine engines to air pollution is small. Improved control of emissions from other sources, increased use of gas turbines, and changes in gas turbine emission ... -
Wall Temperature and Prandtl Number Effects on Turbulent Boundary Layer Thicknesses and Shape Factors for Subsonic Compressible Gas Flow Over a Flat Plate
(The American Society of Mechanical Engineers (ASME), 1969)Based on n-power velocity and temperature profiles a method of computing various turbulent boundary layer thicknesses and shape factors affected by wall temperature and Prandtl number for fully ... -
Gear Design and Laboratory Experience—Marine Gas Turbine Propulsion
(The American Society of Mechanical Engineers (ASME), 1969)A study of marine reduction gear design over the past 15 years and an indication of future development of marine propulsion gearing for gas tubine plants are presented. Emphasis is placed on ... -
Acoustic Resonances and Multiple Pure Tone Noise in Turbomachinery Inlets
(The American Society of Mechanical Engineers (ASME), 1969)Applying the Campbell [4] criterion (for excitation of axisymmetric physical systems in proximity to turbomachinery) to an analytic model of an annular acoustic cavity, a detailed view of acoustic ... -
The Friction Clutch Reverse-Reduction Gears for the GTS Adm. Wm. M. Callaghan
(The American Society of Mechanical Engineers (ASME), 1969)The design and performance of the 20,000-hp reverse-reduction gears and clutches installed in the GTS Adm. Wm. M. Callaghan , the first large high-speed cargo ship designed for gas-turbine ... -
Turbine Blade Vibration Due to Nozzle Wakes
(The American Society of Mechanical Engineers (ASME), 1969)Turbine blade vibrations due to resonance with the nozzle passing frequency have been measured and discussed with primary emphasis on the relationships between the resonant stresses and the stage ... -
Heat Transfer in the Oscillating Turbulent Boundary Layer
(The American Society of Mechanical Engineers (ASME), 1969)Measurements of local heat-transfer coefficients in the fully established oscillating turbulent boundary layer over a flat plate are reported. In the range of frequencies from 0.1 to 200 cps ... -
Laser Ignition of Methane-Air Mixtures at High Pressures and Diagnostics
(The American Society of Mechanical Engineers (ASME), 2005)Methane-air mixtures at high fill pressures up to 30 bar and high temperatures up to 200°C were ignited in a high-pressure chamber with automated fill control by a 5 ns pulsed Nd:YAG ... -
Editorial
(The American Society of Mechanical Engineers (ASME), 2005)In recognition of the 50th anniversary of the ASME International Gas Turbine Institute’s annual gas turbine conference, TURBO EXPO ’05, this April 2005 issue of the Journal is devoted to papers ... -
Parametric Analysis of Existing Gas Turbines With Inlet Evaporative and Overspray Fogging
(The American Society of Mechanical Engineers (ASME), 2005)With deregulation in the power generation market and a need for flexibility in terms of power augmentation during the periods of high electricity demand, power plant operators all over the ...