Journal of Bridge Engineering: Recent submissions
Now showing items 1761-1780 of 3153
-
Closure to “Self‐Anchored Suspension Bridges” by John A. Ochsendorf and David P. Billington
(American Society of Civil Engineers, 2001) -
Finite-Element Modeling of Externally Posttensioned Composite Beams
(American Society of Civil Engineers, 2015)Posttensioning has been used successfully to improve the performance of existing bridge structures. High-strength tendons can be used to effectively increase the ultimate capacity of composite beams. The main purpose of ... -
Review of Infrastructure Health in Civil Engineering by Mohammed M. Ettouney and Sreenivas Alampalli
(American Society of Civil Engineers, 2012) -
Reviewers
(American Society of Civil Engineers, 2008) -
Editor’s Note
(American Society of Civil Engineers, 2005) -
Editor's Note
(American Society of Civil Engineers, 2005) -
Pre-Earthquake Multi-Objective Probabilistic Retrofit Optimization of Bridge Networks Based on Sustainability
(American Society of Civil Engineers, 2014)Planning retrofit actions on bridge networks under tight budget constraints is a challenging process. Because of the uncertainties associated with this process, a probabilistic approach is necessary. In this paper, a ... -
In-Plane Strength and Design of Fixed Concrete-Filled Steel Tubular Parabolic Arches
(American Society of Civil Engineers, 2015)Concrete-filled steel tubular (CFST) arch bridges have the advantages of high compressive strength, light self-weight, and convenience in construction, and thus have been widely used in recent years. The current codes or ... -
Experimental Seismic Response of Hybrid Fiber-Reinforced Concrete Bridge Columns with Novel Longitudinal Reinforcement Detailing
(American Society of Civil Engineers, 2015)The experimental seismic response of two bridge columns built using highly flowable hybrid fiber-reinforced concrete under unidirectional static cyclic lateral loading is presented. The objective was to design bridge columns ... -
Development of UHPC Pi-Girder Sections for Span Length up to 41 m
(American Society of Civil Engineers, 2015)Ultrahigh performance concrete (UHPC) presents many superior properties, such as advanced strength, durability, and long-term stability. The use of existing cross section geometries for materials with advanced properties ... -
Dynamic Response of High-Speed Railway Bridge Decks with Beams Transverse to the Direction of the Track
(American Society of Civil Engineers, 2014)Railway bridge decks are frequently constructed using a concrete slab supported by transverse beams, which in turn are connected to the main longitudinal supporting elements: arches, trusses, and so on. This is a structural ... -
Dynamic Analysis of a Cable-Stayed Concrete-Filled Steel Tube Arch Bridge under Vehicle Loading
(American Society of Civil Engineers, 2015)This paper presents the results from a dynamic analysis of a cable-stayed concrete-filled steel tube arch bridge under vehicle loading. The study is carried out based on a three-dimensional vehicle-bridge coupled model. A ... -
Nonlinear Seismic Analysis of Reinforced Concrete Bridges Using the Force Analogy Method
(American Society of Civil Engineers, 2015)In this paper, a three-dimensional nonlinear dynamic analysis framework for RC bridges is established based on the force analogy method (FAM). Two biaxial local plastic mechanisms, rotation hinge (RH) and slide hinge (SH), ... -
Stress Spikes in Pin and Hanger System of Truss Bridge
(American Society of Civil Engineers, 2001)Several functional problems have been reported on pin and hanger system truss bridges, such as frozen pins, stress spikes in hangers, lack of expansion joint movements, etc. It has been difficult to develop a pin and hanger ... -
Downslope Gusty Wind Loading of Vehicles on Bridges
(American Society of Civil Engineers, 2015)Downslope crosswind bora gusts impacting vehicles represent a significant traffic safety issue, and vehicles on bridges are particularly vulnerable to such crosswinds. Wind tunnel experiments were carried out to investigate ... -
Stress Increment of Unbonded Prestressing Tendons in Prestressed Concrete Girders with Corrugated Steel Webs
(American Society of Civil Engineers, 2015)Experimental and finite-element studies have shown that a significant correlation exists between the stress increment of unbonded prestressing tendons and the flexural load of prestressed concrete girders with corrugated ... -
Simplified Blast-Load Effects on the Column and Bent Beam of Highway Bridges
(American Society of Civil Engineers, 2015)The primary objective of this study is to investigate whether simplified blast loading together with a pier-bent model could be employed to reveal the main damage mechanisms of typical highway bridges subjected to blast ... -
Categories of SHM Deployments: Technologies and Capabilities
(American Society of Civil Engineers, 2015)The findings of an extensive literature survey focusing on bridge structural health monitoring (SHM) deployments are presented. Conventional, maturing, and emerging technologies are reviewed as well as deployment considerations ... -
Special Issue on Recent Advances in Seismic Design, Analysis, and Protection of Highway Bridges
(American Society of Civil Engineers, 2014) -
Deflection Control of Prestressed Box Girder Bridges
(American Society of Civil Engineers, 2014)The models for prediction of creep in codes and design guides are mainly based on tests in which the load is sustained for a number of years, rarely exceeding 10; however, most models predict that creep reaches its extreme ...