Journal of Bridge Engineering: Recent submissions
Now showing items 1601-1620 of 3153
-
Repair of GFRP-Reinforced Concrete Bridge Barriers
(American Society of Civil Engineers, 2014)The Canadian highway bridge design code provides dimensions and reinforcement detailing of concrete bridge barriers reinforced with glass fiber–reinforced polymer (GFRP) bars. However, there are no guidelines on the repair ... -
Assessment and Management of Concrete Bridges Supported by Monitoring Data-Based Finite-Element Modeling
(American Society of Civil Engineers, 2014)The long-term assessment of large and complex civil infrastructures, such as prestressed concrete bridges, based on finite-element (FE) modeling remains a challenging task. The construction process, the influence of erection ... -
Closure to “Shear and Reaction Distributions in Continuous Skew Composite Bridges” by Tarek Ebeido and John B. Kennedy
(American Society of Civil Engineers, 1998) -
Discussion of “Kinematics of Movable Bridges” by Markus Wallner and Martin Pircher
(American Society of Civil Engineers, 2008) -
Nonlinear Finite-Element Analysis of RC Bridge Columns under Torsion with and without Axial Compression
(American Society of Civil Engineers, 2016)Finite-element (FE) modeling of RC structures under combined loading has received considerable attention in recent years. However, the combination of torsion and axial compression has been rarely studied in spite of its ... -
New Editor and Associate Editor Sought, Journal of Bridge Engineering
(American Society of Civil Engineers, 2001) -
Review of <i>The Roebling Legacy</i> by Clifford W. Zink
(American Society of Civil Engineers, 2014) -
Editor's Note
(American Society of Civil Engineers, 2004) -
Papers of Interest
(American Society of Civil Engineers, 2005) -
Anchorage Capacity of Concrete Bridge Barriers Reinforced with GFRP Bars with Headed Ends
(American Society of Civil Engineers, 2014)An experimental program was conducted to investigate the application of headed glass fiber-reinforced polymer (GFRP) ribbed bars at the barrier wall-deck anchorage. Six full-scale barrier models of 1,200 mm in length were ... -
Behavior of a Continuous Composite Box Girder with a Prefabricated Prestressed-Concrete Slab in Its Hogging-Moment Region
(American Society of Civil Engineers, 2015)The application of prestress is a very effective way to prevent the cracking of the concrete slab in the negative-moment region of continuous composite girders, and using a prefabricated prestressed-concrete slab in this ... -
<i>PRACTITIONERS' FORUM: Rating Factor Computations for Shear-Moment Interaction Using AASHTO LRFD</i>
(American Society of Civil Engineers, 1998) -
Editor's Note
(American Society of Civil Engineers, 2002) -
Aerodynamic Stabilization Mechanism of a Twin Box Girder with Various Slot Widths
(American Society of Civil Engineers, 2015)Five representative girder cross sections with various slot widths are utilized to analyze the effects of center slots on their aerodynamic performance, based on wind-tunnel tests and theoretical analyses. It is shown that ... -
Damping Properties of Highway Bridges in China
(American Society of Civil Engineers, 2014)Full-scale data on the natural frequencies and the damping ratios of 114 highway bridges in China, and the dynamic characteristics monitoring data of four bridges under ambient excitation, have been collected and analyzed. ... -
Closure to “Experimental Study on the Performance of Approach Slabs under Deteriorating Soil Washout Conditions” by Yung-Tsang Chen and Y. H. Chai
(American Society of Civil Engineers, 2013) -
State of the Art in Steel-Bridge Construction
(American Society of Civil Engineers, 2004) -
New Method for Shape Finding of Self-Anchored Suspension Bridges with Three-Dimensionally Curved Cables
(American Society of Civil Engineers, 2015)A method for the shape finding of a specific type of self-anchored suspension bridge whose main cable is three-dimensionally curved is proposed in this study. The method, referred to as the coordinate iteration method ... -
Call for Fiber Reinforced Polymer Papers
(American Society of Civil Engineers, 2005) -
Editorial
(American Society of Civil Engineers, 2007)