Journal of Materials in Civil Engineering: Recent submissions
Now showing items 1241-1260 of 7936
-
Application and Vibration Reduction Properties of Prefabricated and Cast-in-Place Phononic-Like Crystal Polymer Concrete Track Bed in Subway Engineering
(American Society of Civil Engineers, 2024)Subway plays an important role in building a three-dimensional urban transportation system and alleviating urban traffic congestion due to its advantages of land conservation, green environmental protection, safety and ... -
Effects of Chloride, Humidity, and Concrete Mix on the Electrochemical Parameters of Steel Reinforcement Corrosion
(American Society of Civil Engineers, 2024)The large uncertainties of electrochemical input parameters, along with their variation with chemical environment and time, can significantly affect the accuracy of simulations and oversimplify the nonuniform corrosion ... -
Effect of Recycled Brick Powder on Corrosion of Reinforced Concrete under the Action of Chloride or Carbonation
(American Society of Civil Engineers, 2024)The mechanism of steel corrosion in recycled brick powder (RBP)–incorporated concrete remains unclear considering the potential utilization of active RBP for low-carbon design in engineering structures. This study aimed ... -
Maturity-Based Method of Early-Strength Characterization of Rapid-Setting Cements
(American Society of Civil Engineers, 2024)The expedient repair of damaged airfield pavements is important to eliminate long closure periods. Rapid-setting cement (RSC) is promising for achieving target strength in a much shorter duration (4–6 h) compared to ... -
The Representative Sample Size for Field Application of the Bending Beam Rheometer as a Low-Temperature Performance Test of Asphalt Mixtures
(American Society of Civil Engineers, 2024)The development of tests, standards, and specifications necessitates the establishment of technical validity while concurrently optimizing costs associated with the testing requirements. AASHTO TP 125-16 recommends the ... -
Temperature-Dependent Constitutive Model of Austenitic High-Strength A4L-80 Bolts after Furnace Fire
(American Society of Civil Engineers, 2024)High-strength carbon steel bolts were fractured by the tension, shear, or combined failure mode in semirigid and flexible beam-to-column connections as observed from natural fire incidents and full-scale fire tests. This ... -
Development of Bioregenerant and Its Potential Application: Investigation for Regeneration of RAP Materials
(American Society of Civil Engineers, 2024)To achieve efficient utilization of reclaimed asphalt pavement (RAP) materials, a bioregenerant (BR) was developed in this research, and waste vegetable oil (WVO), alkylphenol polyoxyethylene ether (APEO), plasticizer ... -
Exploring Pore Structure Characteristics of Alkali Residue-Based Foamed Concrete and Their Effect on Compressive Properties: Insights from Low-Field Nuclear Magnetic Resonance Analysis
(American Society of Civil Engineers, 2024)Based on investigated mechanical properties of alkali residue-based foamed concrete (A-FC), this paper presents a comprehensive examination of the microstructural features of A-FC and their impact on compressive properties. ... -
Preparation and Performance Characterization of Phosphogypsum Whisker Composite Modified Asphalt Binder
(American Society of Civil Engineers, 2024)Solid waste recycling and reuse have attracted great interest as environmentally friendly modifiers for asphalt pavements in recent years, and phosphogypsum whiskers (PSWs) synthesized by phosphogypsum (PSP) wastes were ... -
Influence of Curing Humidity on the Strength and Microstructure of Cement Paste Incorporating Metakaolin and Limestone
(American Society of Civil Engineers, 2024)In this study, the effect of curing humidity on mechanical performance, hydration as well as microstructure for cement paste containing metakaolin (MK) and limestone powder (LP) with various water to binder (w/b) ratios, ... -
Setting Time Optimization of Excessive-Sulfate Phosphogypsum Slag Cement for Self-Compacting Concrete Based on a Paste Rheological Threshold Theory
(American Society of Civil Engineers, 2024)The accumulation of phosphogypsum (PG) has become a significant environmental and economic challenge, making PG reuse an urgent concern. This study aims to explore the potential of combining PG with steel slag (SS), ground ... -
Study on Freeze–Thaw Resistance of Basalt Fiber-Reinforced and Inorganic Curing Agent-Stabilized Shield Tunnel Muck
(American Society of Civil Engineers, 2024)The transportation and disposal of tunnel muck have detrimental environmental impacts. For this reason, the practice of reusing such a resource in engineering materials has substantial environmental and economic benefits. ... -
Liquid Drainage in the Compaction Process of Asphalt Emulsion Mixtures with Cement
(American Society of Civil Engineers, 2024)There is few research about the liquid drainage in the sample compaction of asphalt emulsion mixtures (AEMs). In this study, the liquid drainage of AEMs with cement is quantitatively measured. The air voids, indirect tensile ... -
Development and Mechanical Performance of Self-Compacting Lightweight Aggregate Concrete Using Sintered Fly Ash Aggregates
(American Society of Civil Engineers, 2024)The creation of lightweight aggregate self-compacting concrete (LWA-SCC) is a challenging endeavor with substantial consequences for the construction sector. However, the absence of firmly established design suggestions ... -
Sustainable Approach to Mortar Production Using Mint Stem Aggregates: Investigating the Thermal, Mechanical, and Physical Performance
(American Society of Civil Engineers, 2024)Sustainability is becoming increasingly pivotal in the construction industry, prompting a shift toward the use of bio-sourced waste materials. This study presents a novel application of mint stem (MS) waste as an additive ... -
Measuring the Electroosmotic Permeability Coefficient in Single Bricks
(American Society of Civil Engineers, 2024)The transport process electroosmosis (EO) has been suggested to be used for dewatering damp brick masonry for decades. Still, it is debated whether EO can be obtained in bricks. By use of an advanced EO laboratory cell, ... -
Effect of Flexural Fatigue Loading on Mechanical Properties, Permeability, and Rainstorm Resistance of Novel Pervious Concrete
(American Society of Civil Engineers, 2024)In this paper, a novel pervious concrete (PC) has been proposed, which combines a high-strength self-compacting concrete matrix with artificial pore channels, to prepare a novel self-compacting recycled pervious concrete ... -
Experimental Study of Shrinkage and Creep Behaviors of Low-Shrinkage and Low-Creep C60 High-Performance Concrete and Parameter Recommendations
(American Society of Civil Engineers, 2024)Concrete shrinkage and creep significantly affect the serviceability of bridges, especially long-span bridges. To investigate the long-term shrinkage and creep behaviors of low-shrinkage and low-creep C60 high-performance ... -
Thermoregulation Performance and Mechanical Properties of Phase Change Asphalt Mortars
(American Society of Civil Engineers, 2024)This study investigated the effects of a diatomite/tetradecane composite shaped phase change material (CSPCM) on the mechanical properties and thermoregulation performance of styrene-butadiene-styrene (SBS)- and ... -
Investigation on the Photo-Oxidative Degradation of Amine-Based Epoxy Asphalt Binder
(American Society of Civil Engineers, 2024)This study aims to analyze the degradation behavior and mechanisms of amine-cured epoxy asphalt (EA) under the combined effects of ultraviolet (UV) radiation, oxygen, and temperature. To achieve this, amine-cured epoxy ...