Journal of Materials in Civil Engineering: Recent submissions
Now showing items 1221-1240 of 7936
-
Quick Hardening Properties of the Cement Paste Partially Replaced by the Calcined-Milled Wood Fly Ash
(American Society of Civil Engineers, 2024)The rapid growth of the construction industry has led to issues such as increased consumption of natural resources, energy usage, and carbon emissions. Integrating waste materials into the construction industry can help ... -
Interface Transition Zone in Coal Gangue Aggregate Concrete Reinforced by Phosphorus Slag: Macroscopic Properties and Microstructure
(American Society of Civil Engineers, 2024)This study used phosphorus slag (PS) from yellow phosphorus production to strengthen the structure and performance of the interface transition zone (ITZ) of coal gangue aggregate concrete (CGAC) based on the surface ... -
Study of the Fatigue Damage Characteristics of Emulsified Asphalt Mastics
(American Society of Civil Engineers, 2024)The fatigue performance of emulsified asphalt mastics directly affects the long-term service performance of emulsified asphalt cold recycled pavement. Fatigue properties of 24 different mastics before and after short-term ... -
Strategies for Developing High-Volume Fly Ash Concrete with High Early-Age Strength for Precast Applications
(American Society of Civil Engineers, 2024)Partial replacement of portland cement with supplementary cementitious materials (SCMs), such as fly ash, is an effective strategy for improving durability and reducing the CO2 footprint of concrete. However, using high-volume ... -
Multiscale Study of the Damage Evolution Mechanism of Polyurethane Concrete under Freeze–Thaw Conditions
(American Society of Civil Engineers, 2024)The macroscopic physical and mechanical behavior, mesocosmic pore size distribution, and microscopic particle morphology of polyurethane concrete (PUC) during freeze–thaw conditions are thoroughly examined in this research. ... -
Low-Temperature Performance of Acrylonitrile-Butadiene-Styrene and Crumb Rubber Compound–Modified Asphalt Activated by Waste Cooking Oil Surface Treatment
(American Society of Civil Engineers, 2024)Compound modified asphalt with waste plastic and crumb rubber can enhance the application of crumb rubber–modified asphalt (CRMA) in engineering, and enable the recycling of waste resources. In this study, waste cooking ... -
Mechanical and Functional Properties of Continuously Paving Functional Asphalt Mixture with Double-Gradation Based on Different Volumetric Ratios
(American Society of Civil Engineers, 2024)This study aims to design a double-gradation functional asphalt mixture considering continuous paving action and to investigate the effect of different gradation volume ratios on the mechanical behavior and functional ... -
Effects of Antioxidant-Intercalated LDHs on Long-Term Thermal Oxidation Aging and Ultraviolet Aging Resistances of SBS-Modified Asphalt
(American Society of Civil Engineers, 2024)This research aimed to enhance the ultraviolet aging and long-term thermal oxidation aging resistances of styrene-butadiene-styrene (SBS)-modified asphalt simultaneously. For this purpose, antioxidant 1222–intercalated ... -
Development of the Criteria for Optimum Filler–Binder Ratio in an Asphalt Mix Based on Fatigue Performance
(American Society of Civil Engineers, 2024)This research aims to propose a framework for selecting the optimum filler–binder (F-B) ratio in an asphalt mixture, with the objective to achieve desired fatigue performance at the lowest possible binder content. The ... -
Impact of Sulfuric Acid Attack in Portland Cement Mortar Mixtures with Chitosan Addition
(American Society of Civil Engineers, 2024)This paper investigates the impact of chitosan addition on mortar performance during sulfuric acid attack. Twenty-four mortars were prepared using Brazilian portland cements, varying traces, and chitosan dosages ranging ... -
Study on the Mechanics and Mechanism of Synergistic Solidification of Saline Soil by Sulfur-Free Lignin, Basalt Fiber, and Hydrophobic Polymer
(American Society of Civil Engineers, 2024)In order to improve the adverse engineering properties of saline soil and to comply with the concept of sustainable development, a novel green and pollution-free soil solidification method consisting of a composite of ... -
Adhesion Characteristics of Warm-Mix Crumb Rubber-Modified Asphalt-Steel Slag Interface under Water Erosion
(American Society of Civil Engineers, 2024)In order to study the effect of water erosion on the adhesion characteristics of warm-mix crumb rubber-modified asphalt (WCR)-steel slag interface, hot-mix crumb rubber-modified asphalt (HCR) was used as the control group. ... -
Green Disposal of Domestic Wastewater in Alkali-Activated Slag Mortar: Enhancing Performance and Sustainability
(American Society of Civil Engineers, 2024)The global increase in water consumption has led to significant domestic wastewater (DW), with only 55.5% being treated properly. Discharging untreated DW has serious environmental consequences and wastes a valuable resource. ... -
Cross-Section Size Effects on Compressive Failure Properties Parallel to Grain of Chinese Larch LVL
(American Society of Civil Engineers, 2024)Laminated veneer lumber (LVL), characterized by its efficient utilization of raw materials, flexible size design, extensive prefabrication, and favorable mechanical properties, is an engineering wood frequently employed ... -
Material Design and Mechanism Explanation of Epoxy Asphalt Toughened with SBS/CR and CSR
(American Society of Civil Engineers, 2024)As a potential long-life pavement material, the high brittleness of epoxy asphalt prevents its application. Recycled from waste tires, crumb rubber (CR) can be used with styrene-butadiene-styrene (SBS) to prepare SBS/CR ... -
Study on the Performance and Hydration Mechanism of Concrete Incorporating Phosphorus Tailings
(American Society of Civil Engineers, 2024)Phosphorus tailings are solid wastes generated from mineral processing. It limits the green development of phosphorus chemical industries. Phosphorus tailings mainly consist of dolomite, fluorapatite, and quartzite, so ... -
Upcycling Spent Waterglass Foundry Sand into Reactive Fine Aggregates for Alkali-Activated Slag to Achieve Enhanced Compressive Strength
(American Society of Civil Engineers, 2024)Spent waterglass foundry sand (SWFS) is a major waste in foundry industries and should be disposed of preferentially. Two SWFS subjected to working temperatures of 100°C (SWFS1) and 800°C (SWFS8) were prepared to investigate ... -
Microstructural Analysis of C-(A-M)-S-H Formation in the Portland Cement Paste through the Internal Mg2+ Incorporation
(American Society of Civil Engineers, 2024)Sulfate plays a critical role in portland cement. The internal gypsum (CaSO4·2H2O) incorporating with clinker controls the hydration of cement, while the external gypsum can attack the hydration products. Magnesium sulfate ... -
Investigating the High-Temperature Performance of Asphalt Binders Blended with Nanocenospheres
(American Society of Civil Engineers, 2024)This experimental work presents the effects of integrating nanocenospheres into asphalt binders. Nanocenospheres are hollow spherical nanoparticles sourced from thermal power plants. They are characterized by size, shape, ... -
Low-Temperature Mechanical Properties of AA 6063-T6 and 7075-T6: Tests and Full-Range Constitutive Models
(American Society of Civil Engineers, 2024)Aluminum alloys (AAs) are potential alternative constructional materials for low-temperature infrastructures in cold regions and liquefied natural gas (LNG) storage tanks. This study investigated the mechanical properties ...