Journal of Aerospace Engineering: Recent submissions
Now showing items 701-720 of 2488
-
Thermal Extraction of Volatiles from Lunar and Asteroid Regolith in Axisymmetric Crank–Nicolson Modeling
(ASCE, 11/1/2020 )A physics-based computer model has been developed to support the development of volatile extraction from the regolith of the Moon and asteroids. The model is based upon empirical data sets for extraterrestrial soils and ... -
Experimental Investigation of the Far-Field Noise Generated from the Cruise Configuration of Aircraft High-Lift Device
(ASCE, 9/1/2020 1)Air traffic has developed rapidly in the last decades. The noise generated from aircraft can impair the health of passengers and airport residents, so it is necessary to reduce aircraft noise and relieve the annoyance due ... -
Impact of Ground Proximity on an Inverted Delta Wing
(ASCE, 9/1/2020 1)The impact of ground proximity on the aerodynamics and trailing vortices of an inverted delta wing was investigated experimentally. The ground proximity always led to a lift and drag increase compared to their outside ... -
Shape Optimization of Near-Space Airships Considering the Effect of the Propeller
(ASCE, 9/1/2020 1)The stern-mounted propellers of near-space airships affect the aerodynamic characteristics of envelopes. Hence, the influence of propellers on the optimization design of envelopes should be considered. In this study, the ... -
Effect of Slot Area Ratio and Slot Angle on Swirl Cooling in a Gas Turbine Blade Leading Edge
(ASCE, 9/1/2020 1)This paper numerically simulated a swirl cooling system to study the influences of the slot area ratio and slot angle on the flow field and heat transfer performance. Numerical simulations were performed for different ... -
Flattening Effect of Negative Gaussian Curvature on Simply Supported Thick Asymmetric Cross-Ply Panels in the Absence of Surface-Parallel Edge Restraints
(ASCE, 11/1/2020 )This paper investigated the flattening effect of negative Gaussian curvature on simply supported (SS) thick asymmetrically laminated cross-ply panels in the absence of surface-parallel edge restraints. A higher-order shear ... -
Point-Based Mesoscopic Modeling and Simulation for Two-Step 3D Braided Composites
(ASCE, 9/1/2020 1)A point-based modeling scheme for the mesostructure of a two-step three-dimensional (3D) braided composite is proposed. The yarn path and the section profile are more realistic than the traditional mesh-based model, and ... -
Star Centroid Positioning Error Correction Aided by Gyroscope Output in INS and CNS
(ASCE, 9/1/2020 1)In a traditional integrated inertial navigation system (INS) and celestial navigation system (CNS) setup, measurements from both systems are only fused at the data output phase. Navigation star centroid positioning error ... -
Design and Testing of an Unmanned Aerial Vehicle Manufactured by Fused Deposition Modeling
(ASCE, 7/1/2020 1)The capacity to manufacture complex structures directly without the need for a mold gives additive manufacturing (AM) technologies a major advantage compared with conventional manufacturing. An interesting and challenging ... -
Stochastic Modeling and Reliability Analysis of Wing Flutter
(ASCE, 9/1/2020 1)In this work, a physics-based first-order reliability method (FORM) algorithm is proposed for the flutter reliability analysis of an aircraft wing in the frequency domain. The limit state function, which is an implicit ... -
Combustion Characteristics of Paraffin-Polyethylene Blends Fuel for Solid Fuel Ramjet
(ASCE, 7/1/2020 1)In this paper, a series of firing tests have been conducted via a connected pipe facility to investigate the influences of the paraffin blends fuel on combustion characteristics of solid-fuel ramjet engines. A three-dimensional ... -
Novel Criterion for Evaluation of Stationarity in Nonlinear Structural Dynamics
(ASCE, 7/1/2020 1)The evaluation of stationarity, such as the widely used steady-state response assessment in stepped-sine testing, is a critical issue in structural dynamics. Stepped-sine excitation is a crucial testing method for nonlinear ... -
Experimental Study of Ground Effect on Horizontal Tail Effectiveness of a Conceptual Advanced Jet Trainer
(ASCE, 7/1/2020 1)This research has provided the results for a static test of a conceptual advanced jet trainer (CAJT) aircraft in a low-speed wind tunnel within take-off and landing angle of attack limits. Test data includes longitudinal ... -
Exceedance Probability Assessment of Pedestrian Wind Environment Based on Multiscale Coupling Numerical Simulation
(ASCE, 7/1/2020 1)This paper presents exceedance probability assessment, which is a statistical evaluation method for pedestrian wind environment based on numerical simulations with multiscale coupling techniques. The Meixi Lake community ... -
Hybrid Nonlinear Seismic Analysis of Bridges with Moving Traffic
(ASCE, 1/1/2020 1)Owing to current limitations on seismic forecasting, there is a high chance that a considerable number of vehicles will remain on bridges when an earthquake occurs. In traditional seismic analyses, traffic loads were often ... -
Influence of Staggering and Interdistance on Performance of a Low-Speed Counterrotating Axial Fan
(ASCE, 1/1/2020 1)Counterrotating axial fans (CRF) are being adopted in air ventilation to meet the demand for a higher pressure head and swirl-free discharge. This experimental and numerical study is aimed at investigating the influence ... -
Data-Driven Structural Health Monitoring Approach Using Guided Lamb Wave Responses
(ASCE, 2020)In this paper, a data-driven structural health monitoring (SHM) approach is proposed to conduct in situ evaluation of the structural health state, i.e., damage location and extent, in which guided Lamb wave responses ... -
Structural Batteries in Aviation: A Preliminary Sizing Methodology
(ASCE, 2020)A significant research effort in aviation is currently focused on the integration of electric or hybrid-electric power-trains onboard aircraft in an effort to improve efficiency and environmental friendliness. New designs ... -
Real-Time Autonomous Obstacle Avoidance for Fixed-Wing UAVs Using a Dynamic Model
(ASCE, 2020)This paper presents an approach for real-time autonomous obstacle avoidance for fixed-wing unmanned aerial vehicles (UAVs) for scenarios in which a UAV is required to stay close to a reference path. A key challenge is rapid ... -
Aerodynamic Interference and Reynolds Number Effects of Low-Speed Close-Coupled Biplanes
(ASCE, 2020)Modern aircraft design, given the trend to achieve smaller sizes and higher altitudes, urgently needs to introduce new configurations to achieve higher aerodynamic efficiency within a range of moderate Reynolds numbers ...