Journal of Aerospace Engineering: Recent submissions
Now showing items 301-320 of 2488
-
Disturbance Observer–Based Backstepping Control for Hypersonic Vehicles with Input Constraints
(ASCE, 2024/01/01)A super-twisting disturbance observer–based adaptive fixed-time antisaturation backstepping control algorithm is designed for hypersonic vehicles with input constraints. First, super-twisting disturbance observers are ... -
Optimal Abort Guidance and Experimental Verification Based on Feature Learning
(ASCE, 2024/03/01)The abort mission refers to the mission where the landing vehicle needs to terminate the landing mission when an anomaly happens and be safely guided to the desired orbit. This paper focuses on solving the time-optimal ... -
Output-Constrained Adaptive Composite Nonsingular Terminal Sliding Mode Attitude Control for a Class of Spacecraft Systems with Mismatched Disturbances and Input Uncertainties
(ASCE, 2024/01/01)This paper proposes a novel neural-network-based (NN-based) adaptive composite terminal sliding mode (TSM) control scheme for a class of spacecraft systems with mismatched disturbances and input uncertainties. The key point ... -
Formation Optimization for Multiple UAVs by Considering Constrained Effectiveness and Attitude Coupling Tracking
(ASCE, 2024/01/01)Multiple unmanned aerial vehicle (UAV) cooperative operations have been proposed as a relatively new concept for improving the combat capability of a single UAV, and formation control is the focus and core technology of ... -
Intelligent Model Predictive Control and Its Application to Aeroengines
(ASCE, 2024/07/01)In this paper, a new model predictive control termed as intelligent model predictive control (IMPC) combined with an improved new competitive swarm optimizer (CSO) is designed. The analytical predictive model is not ... -
Reinforcement Learning–Based Adaptive Attitude Control Method for a Class of Hypersonic Flight Vehicles Subject to Nonaffine Structure and Unmatched Disturbances
(ASCE, 2024/03/01)This paper proposes a reinforcement learning–based adaptive attitude control (RLAC) method for a class of hypersonic flight vehicles (HFVs) output constrained nonaffine attitude control problems subject to unmatched ... -
Investigation of Deep Reinforcement Learning for Longitudinal-Axis Flight Control
(ASCE, 2024/03/01)Traditional aerodynamic modeling methods have some difficulties in multiparameter unsteady state-space modeling and control law design, which raise significant challenges in flight control. The rapid development of machine ... -
Observer-Based Output Feedback Tracking Control for Flexible Joint Space Manipulator with Output Constraints
(ASCE, 2024/01/01)This paper proposed an observer-based output feedback tracking controller with output constraints for the rigid-link flexible-joint space manipulator system considering the dynamic damping caused by the torque change. By ... -
Active Stall Flutter Suppression for a Revised Leishman–Beddoes Model
(ASCE, 2024/01/01)This paper proposes a nonlinear disturbance observer (NDO)–based sliding mode control (SMC) method to the problem of stall flutter suppression for a revised Leishman–Beddoes (L–B) model. To capture accurate aerodynamic ... -
Influence of Nonflat Plate Trailing Edge Serration on Airfoil Noise Reduction
(ASCE, 2024/03/01)The current study experimentally investigates the influence of nonflat plate trailing edge serrations on airfoil noise characteristics. Experiments are carried out at different flow velocities in the range of 25–40 m/s, ... -
Three-Dimensional Composite Approach Angle Constrained Guidance Law with Actuator Lag Consideration
(ASCE, 2024/03/01)This paper considers the problem of unmanned aerial vehicle (UAV) aerial collision net recovery in a three-dimensional non-decoupling environment and approach angle constraint. A robust control-observer framework-based ... -
Experimental Study of Passive Jet Flow Control of Chamfered Square Cylinder
(ASCE, 2024/03/01)This study conducted wind tunnel tests to verify a passive jet flow control method for suppressing the aerodynamic force on a chamfered square cylinder at a moderate Reynolds number, focusing on the influence of the opening ... -
A Novel Control Surface for Energy-Optimum Maneuver for Solar-Powered Aircraft
(ASCE, 2024/01/01)This paper presents a new control surface, which we have named auxiron, that helps a solar-powered aircraft to orient itself according to the position of the sun in the sky to collect more solar power. The auxiron also ... -
New Flow Control Optimal Design Method of Flapping Wing Coupled with a Prepositive Elliptical Wing
(ASCE, 2024/01/01)A flapping-wing flow control method based on a prepositive elliptical wing is proposed in this study. A tiny elliptical wing is designed at a specific position around the leading edge of the flapping wing to suppress and ... -
Numerical Study of the Flow and Characteristics in a Multistage Compressor Based on Different Spatial Distribution Forms of Rainwater
(ASCE, 2024/01/01)An aeroengine must be able to work safely under severe weather such as rainy weather. The intake of excessive rainwater into the aeroengine can induce stall and surge in the compressor, and the performance changes of the ... -
DDES Study on the Influence of a Whisker Trailing Edge on the Wake-Blade Interaction of a High-Pressure Turbine Stage
(ASCE, 2024/03/01)In this study, the whisker structure of a harbor seal is utilized on the trailing edge of a high-pressure turbine stage to control the interaction between the wake and the blade. The paper investigates two cases: a prototype ... -
Magnetohydrodynamic Control of a Hypersonic Shock–Turbulent Boundary Layer Interaction
(ASCE, 2024/05/01)High-speed flows over a 34° compression corner subjected to several types of applied electromagnetic fields are numerically investigated. A coupled model for the turbulent flow field and the externally applied electromagnetic ... -
Multistage Compressor Design Based on Dimensional Zooming
(ASCE, 2024/05/01)This paper proposed an axial multistage compressor aerodynamic design methodology based on dimensional zooming. Two-dimensional design parameters are acquired through the dimensionality reduction of three-dimensional data ... -
Analytical and Experimental Studies on Modified Wing Configurations of Cessna 172-R Aircraft to Improve Performance
(ASCE, 2024/05/01)This study investigated the impact of wing design on the performance of the Cessna 172-R aircraft, focusing on modifications to its wing geometry. The study proposes two alternate configurations: one with increasing the ... -
Parametric Numerical Simulation of Flow Field in Scaled U-Shaped Ground Test Cell
(ASCE, 2024/03/01)The high-quality flow field of an aeroengine ground test cell is the basis for accurate and reliable engine testing and obtaining relevant performance data. In this study for a U-shaped ground test cell, first, the similarity ...