Journal of Aerospace Engineering: Recent submissions
Now showing items 281-300 of 2488
-
A Novel Unsteady Vortex Ring Method for Aerodynamic Calculations of a Flapping Wing Rotor
(ASCE, 2024/03/01)A new bio-inspired flapping wing rotor (FWR) configuration combining the high lift of a flapping wing (FW) with the vertical take-off and landing characteristics of a rotor has proved its concept feasibility in the last ... -
Real-Time Data-Driven Inverse Heat Conduction Method for a Reentry Flight Vehicle Based on the Random Forest Algorithm
(ASCE, 2024/01/01)The real-time monitoring of heat fluxes on the surface of a flight vehicle is vital for safe reentry and efficient attitude control. However, conducting measurements during flight is a challenge. In this study, a real-time ... -
Thermal-Mechanical Coupling Performance and Its Influence on Thermal Stiffness of Cylindrical Roller Bearings
(ASCE, 2024/07/01)Rolling element bearings are widely used in aero engines, high-speed trains, precision machine tools, and other technical fields due to their high rotational accuracy and strong carrying capacity. With the development of ... -
Subcritical Debonding Characterization of GFRP-Concrete Bonded Interface Using Modified Single Cantilever Beam Specimens
(ASCE, 2024/01/01)Subcritical debonding of glass fiber reinforced polymer (GFRP)-concrete bonded interface in both the air (room environment) and water is characterized using the modified single cantilever beam specimens. A modified specimen ... -
Experimental Investigation of Deployment Process of Large Hoop Truss Antenna for Space
(ASCE, 2024/05/01)Large hoop truss antennas are locked into a stable structure during deployment in space. The key to characterizing the performance of each mechanism, and discovering problems in the deployment process, is the three-dimensional ... -
Numerical Study of the Trajectory, Penetration, and Interaction of Single and Tandem Jets in a Crossflow Using LES
(ASCE, 2024/01/01)In this paper, a large eddy simulation (LES) method was used to conduct a study on single and tandem jets in a crossflow, focusing particularly on their trajectory, penetration, and interaction. The numerical model was ... -
Structural Damage Identification Based on Quadratic Optimization of Objective Functions with Modal Residual Force and Weighting Strategy
(ASCE, 2024/01/01)Structural damage identification (SDI), an important issue in the field of structural health monitoring (SHM), is usually converted into a constrained optimization problem. However, the conventional objective functions ... -
Integrated Guidance and Control Scheme for Unmanned Aerial Vehicle with Unknown Control Coefficient Accommodating Approach Angle and Field-of-View Constraints
(ASCE, 2024/05/01)This paper investigates the issue of integrated guidance and control (IGC) design for an unmanned aerial vehicle with an unknown control coefficient, approach angle constraint, and field-of-view limitations. Different from ... -
Electromechanical Deicing of Helicopter Structures with Integrated Ice Detection by Impedance Measurement
(ASCE, 2024/01/01)To operate small and medium-sized helicopters even under critical icing conditions, new deicing technologies are necessary because the existing heating solutions cannot be economically downscaled without drastically reducing ... -
Controllable Degree Analysis of Space Manipulators with Free-Swing Joint Failure
(ASCE, 2024/01/01)Due to the harsh space environment, burdensome tasks, and complex structure, space manipulators are vulnerable to joint failure, especially the free-swing joint failure during on-orbit operation. The unactuated units, ... -
Noise Reduction of Multinozzle Rocket Jet by Multideck Water Injection
(ASCE, 2024/03/01)During the launch phase of a multinozzle rocket, the high-level noise induced by the supersonic jet ejected from the nozzles significantly affects the structural safety of the rocket and the reliability of the instruments. ... -
Spacecraft Close Proximity to Noncooperative Target Based on Pseudospectral Convex Method
(ASCE, 2024/07/01)This paper proposes a trajectory-optimization problem for spacecraft close proximity to a noncooperative target, aiming at the generation of a six-degree-of-freedom (DOF) trajectory with the fuel-optimal objective value ... -
Stability Analysis for Incremental Adaptive Dynamic Programming with Approximation Errors
(ASCE, 2024/01/01)This paper provides a convergence and stability analysis of the incremental value iteration algorithm under the influence of various errors. Incremental control is firstly used to linearize the continuous-time nonlinear ... -
Fast Online Trajectory Generation for Time Adjustable Flight Consensus
(ASCE, 2024/05/01)In this paper, a fast online guidance law generation method is proposed to resolve the flight time control guidance design problem for time adjustable flight consensus via an analytical polynomial shaping approach. The ... -
Numerical Study of Discrete Hole Supersonic Film Cooling with Shock Generator
(ASCE, 2024/03/01)The effects of the shock wave and the expansion fan on the flat plate film cooling are numerically studied under the supersonic condition with inclined cylindrical film holes. A triangular-shaped shock generator is applied, ... -
Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory
(ASCE, 2024/03/01)A propeller blade has a significant effect on the performance of a propulsion system. It is of great significance to develop an efficient and accurate optimization strategy for propeller design in the preliminary stage. A ... -
Three-Dimensional Ascent Guidance Method for Two-Stage Solid Rocket Launch Vehicles under Multiple Constraints and Uncertainties
(ASCE, 2024/01/01)This article proposes a new three-dimensional (3D) guidance algorithm for a two-stage solid rocket-powered launch vehicle in the ascent phase. The method consists of a longitudinal and lateral cooperative online trajectory ... -
Aerodynamic Assessment of a Control Strategy Based on Twist Morphing Wing in a Flying Wing Aircraft
(ASCE, 2024/01/01)Wing smarting and eliminating conventional control surfaces are fundamental parameters for improving aircraft aerodynamic performance in future aviation. Twist is a well-known tool that, along with the development of ... -
Cooperative Landing on Mobile Platform for Multiple Unmanned Aerial Vehicles via Reinforcement Learning
(ASCE, 2024/01/01)This paper proposes a multiple unmanned aerial vehicles (UAVs) cooperative landing algorithm based on deep reinforcement learning. First, to solve the partial observation problem, we propose the recurrent neural network ... -
Prescribed-Time Guidance Law with Approach Angle Constraint and Actuator Faults
(ASCE, 2024/01/01)In this paper, a prescribed-time guidance law with approach angle constraint in the presence of an actuator fault is proposed. Firstly, a sliding mode manifold with prescribed-time convergence is given to ensure that the ...