YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Optimal Shock Pulse in a Drop Test Simulation of Standardized Board for Uniform Shock Response

    Source: Journal of Electronic Packaging:;2016:;volume( 138 ):;issue: 004::page 41001
    Author:
    Kallolimath, Sharan
    ,
    Zhou, Jiang Jenny
    DOI: 10.1115/1.4034187
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Boardlevel physical test performance of CSP/BGA packages need in depth characterization of loading parameters and material behavioral properties. In recent years, many calibration methods were adopted by the researchers and industries to improvise solder joint performances of packages. Effective and uniform board response is one of the critical challenges in developing test board to qualify package components for solder joint reliability qualification. In this paper, an improvised board type alternative to standard Joint Electron Device Engineering Council (JEDEC) board is developed for uniform stress/strain response. An axis symmetrical board is chosen in comparison to the current JEDEC board. The effectiveness of the two boards are compared with each other under extreme banding under controlled drop test simulation. The uniform stress–stain distribution is recorded maintaining the noring phenomenon by selecting optimal shock pulse parameters. Selected impact/shock pulse is decided by identifying the maximum impact energy absorbed by the board during the drop event. Board surface strain and stress data are captured 1–2 mm away near the components are quantified for higher strain rate. The board local strain rate on the board surface is recorded at a selected timestep to quantify the dynamic stresses along the component side surface on the board. The simulation is performed by using ANSYS software using implicit method. Both linear SOLID45 and quadratic SOLID95 elements are used to compare and correlate the results. Close forms of results were correlated with the previous theoretical results.
    • Download: (3.878Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Optimal Shock Pulse in a Drop Test Simulation of Standardized Board for Uniform Shock Response

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/160832
    Collections
    • Journal of Electronic Packaging

    Show full item record

    contributor authorKallolimath, Sharan
    contributor authorZhou, Jiang Jenny
    date accessioned2017-05-09T01:27:34Z
    date available2017-05-09T01:27:34Z
    date issued2016
    identifier issn1528-9044
    identifier otherep_138_04_041001.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160832
    description abstractBoardlevel physical test performance of CSP/BGA packages need in depth characterization of loading parameters and material behavioral properties. In recent years, many calibration methods were adopted by the researchers and industries to improvise solder joint performances of packages. Effective and uniform board response is one of the critical challenges in developing test board to qualify package components for solder joint reliability qualification. In this paper, an improvised board type alternative to standard Joint Electron Device Engineering Council (JEDEC) board is developed for uniform stress/strain response. An axis symmetrical board is chosen in comparison to the current JEDEC board. The effectiveness of the two boards are compared with each other under extreme banding under controlled drop test simulation. The uniform stress–stain distribution is recorded maintaining the noring phenomenon by selecting optimal shock pulse parameters. Selected impact/shock pulse is decided by identifying the maximum impact energy absorbed by the board during the drop event. Board surface strain and stress data are captured 1–2 mm away near the components are quantified for higher strain rate. The board local strain rate on the board surface is recorded at a selected timestep to quantify the dynamic stresses along the component side surface on the board. The simulation is performed by using ANSYS software using implicit method. Both linear SOLID45 and quadratic SOLID95 elements are used to compare and correlate the results. Close forms of results were correlated with the previous theoretical results.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleOptimal Shock Pulse in a Drop Test Simulation of Standardized Board for Uniform Shock Response
    typeJournal Paper
    journal volume138
    journal issue4
    journal titleJournal of Electronic Packaging
    identifier doi10.1115/1.4034187
    journal fristpage41001
    journal lastpage41001
    identifier eissn1043-7398
    treeJournal of Electronic Packaging:;2016:;volume( 138 ):;issue: 004
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian