YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Electronic Packaging
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Gas–Liquid Flow Dispersion in Micro Orifices and Bubble Coalescence With High Flow Rates

    Source: Journal of Electronic Packaging:;2016:;volume( 138 ):;issue: 001::page 10905
    Author:
    Tollkأ¶tter, A.
    ,
    Reichmann, F.
    ,
    Schirmbeck, F.
    ,
    Wesholowski, J.
    ,
    Kockmann, N.
    DOI: 10.1115/1.4032557
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The flow of microbubbles in millichannels with typical dimensions in the range of few millimeters offers a reduced pressure loss with simultaneous large specific contact surface. The transformation of pressure into kinetic energy creates secondary flow in microorifices, which results in continuous bubble dispersion. In this work, bubble flow through different orifices and channel modules with widths up to 7 mm are experimentally and numerically studied. The effect of the orifice dimensions on bubble sizes is evaluated for hydraulic diameters of 0.25–0.5 mm with different aspect ratios. To provide larger residence times of the generated dispersions in the reactor, several channel structures are analyzed to offer less coalescence. Volume flow rates of 10–250 mL/min are studied with various phase ratios. Bubble diameters are generated in the range of less than 0.1–0.7 mm with narrow size distributions depending on the entire flow rate. Opening angles of the orifices above 6 deg resulted in flow detachments and recirculation zones around the effluent jet. The first breakup point is shifted closer to the orifice outlet with increasing velocity and hydraulic diameter. The entire breakup region stays nearly constant for each orifice indicating stronger velocity oscillations acting on the bubble surface. Linear relation of smaller bubble diameters with larger energy input was identified independent from Reynolds number. Flow detachment and coalescence in bends were avoided by an additional bend within the curve based on systematically varied geometrical dimensions.
    • Download: (1.642Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Gas–Liquid Flow Dispersion in Micro Orifices and Bubble Coalescence With High Flow Rates

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/160804
    Collections
    • Journal of Electronic Packaging

    Show full item record

    contributor authorTollkأ¶tter, A.
    contributor authorReichmann, F.
    contributor authorSchirmbeck, F.
    contributor authorWesholowski, J.
    contributor authorKockmann, N.
    date accessioned2017-05-09T01:27:27Z
    date available2017-05-09T01:27:27Z
    date issued2016
    identifier issn1528-9044
    identifier otherep_138_01_010905.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/160804
    description abstractThe flow of microbubbles in millichannels with typical dimensions in the range of few millimeters offers a reduced pressure loss with simultaneous large specific contact surface. The transformation of pressure into kinetic energy creates secondary flow in microorifices, which results in continuous bubble dispersion. In this work, bubble flow through different orifices and channel modules with widths up to 7 mm are experimentally and numerically studied. The effect of the orifice dimensions on bubble sizes is evaluated for hydraulic diameters of 0.25–0.5 mm with different aspect ratios. To provide larger residence times of the generated dispersions in the reactor, several channel structures are analyzed to offer less coalescence. Volume flow rates of 10–250 mL/min are studied with various phase ratios. Bubble diameters are generated in the range of less than 0.1–0.7 mm with narrow size distributions depending on the entire flow rate. Opening angles of the orifices above 6 deg resulted in flow detachments and recirculation zones around the effluent jet. The first breakup point is shifted closer to the orifice outlet with increasing velocity and hydraulic diameter. The entire breakup region stays nearly constant for each orifice indicating stronger velocity oscillations acting on the bubble surface. Linear relation of smaller bubble diameters with larger energy input was identified independent from Reynolds number. Flow detachment and coalescence in bends were avoided by an additional bend within the curve based on systematically varied geometrical dimensions.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleGas–Liquid Flow Dispersion in Micro Orifices and Bubble Coalescence With High Flow Rates
    typeJournal Paper
    journal volume138
    journal issue1
    journal titleJournal of Electronic Packaging
    identifier doi10.1115/1.4032557
    journal fristpage10905
    journal lastpage10905
    identifier eissn1043-7398
    treeJournal of Electronic Packaging:;2016:;volume( 138 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian