Assessment of a Jack Up Offshore Launching Through Model Tests and Field Measurements

Abstract

Recently, an experimental campaign was carried out to assess the feasibility of the launching operation of two jackup units using a barge as the launching platform. This experimental study was divided in four stages. In stages 1 to 3, a series of preliminary model tests were performed in order to provide scientific understanding of the mechanics of the operation and investigate systematically the influence of launching parameters. The experimental approach developed for testing this operation and the results of the preliminary launching tests have already been discussed in detail. Based on the analyses of the experimental results of stages 1 to 3 and the results of numerical simulation tools in stage 4, a final launching condition was designed and a new set of model tests was specified to check the safety of the operation. This paper presents the results and analyses of the experimental tests of stage 4. The conditions tested in this stage covered the expected real launching condition and possible deviations in some launch parameters. The tests results include the 6 degreeoffreedom (DOF) motions and trajectories of the launched jackup and the launch barge, and the reaction forces on the barge rocker arms. Later on, the success of the launching operations of P59 and P60 jackup units confirmed the experimental investigation results and the feasibility of this novel launching procedure. During the launching of unit P60, field measurements were performed that confirmed that model tests as an efficient tool for the assessment of high risk operations.