Effect of Dispersion Conditions on the Thermal and Mechanical Properties of Carbon Nanofiber–Polyester Nanocomposites

Abstract

In this study, sonication dispersion technique was employed to infuse 0.1–0.4 wt.% carbon nanofibers (CNFs) into polyester matrix to enhance thermomechanical properties of resulting nanocomposites. The effect of dispersion conditions has been investigated with regard to the CNF content and the sonication time. Xray diffraction (XRD) analysis and scanning electron microscopy (SEM) micrographs revealed excellent dispersion of 0.2 wt.% CNF infused in polyester, resulting in enhanced mechanical responses. Polyester with 0.2 wt.% CNF samples resulted in 88% and 16% increase in flexural strength and modulus, respectively, over the neat one. Quasistatic compression tests showed similar increasing trend with addition of CNF. Fracture morphology study of tested samples revealed relatively rougher surface in CNFloaded polyester compared to the neat due to better interaction between the fiber and the matrix. Dynamic mechanical analysis (DMA) study exhibited about 35% increase in the storage modulus and about 5 آ°C increase in the glass transition temperature (Tg). A better thermal stability in the CNFloaded polyester was observed from the thermogravimetric analysis (TGA) studies. Best results were obtained for the 0.2 wt.% CNF loading with 90 mins of sonication and 50% sonication amplitude. It is recommended that this level of sonication facilitates suitable dispersion of the CNF into polyester matrices without destroying the CNF's structure.