Show simple item record

contributor authorBusch, Stephen
contributor authorMiles, Paul C.
date accessioned2017-05-09T01:18:15Z
date available2017-05-09T01:18:15Z
date issued2015
identifier issn1528-8919
identifier othergtp_137_10_101503.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/158047
description abstractA Moehwald HDA (HDA is a German acronym: Hydraulischer Druckanstieg: hydraulic pressure increase) injection quantity and rate measuring unit is used to investigate injection rates obtained with a fastacting, preproduction diesel solenoid injector. Experimental parametric variations are performed to determine their impact on measured injection rate traces. A pilot–main injection strategy is investigated for various dwell times; these preproduction injectors can operate with very short dwell times with distinct pilot and main injection events. Dwell influences the main injection rate shape. A comparison between a diesellike fuel and a gasolinelike fuel shows that injection rates are comparable for a single injection but dramatically different for multiple injections with short dwells.
publisherThe American Society of Mechanical Engineers (ASME)
titleParametric Study of Injection Rates With Solenoid Injectors in an Injection Quantity and Rate Measuring Device
typeJournal Paper
journal volume137
journal issue10
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4030095
journal fristpage101503
journal lastpage101503
identifier eissn0742-4795
treeJournal of Engineering for Gas Turbines and Power:;2015:;volume( 137 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record