Multiple Quality Characteristics Optimization of Ball Grid Array Wire Bonding ProcessSource: Journal of Electronic Packaging:;2015:;volume( 137 ):;issue: 004::page 41004DOI: 10.1115/1.4031471Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper presents an integrated approach combining principal component analysis (PCA) and Taguchi methods to develop a ball grid array (BGA), gold (Au) wire bonding process with multiple quality characteristics optimization. Eight main process factors of BGA wire bonding technology are selected as the control factors for parameter design. They are the factor A (seating ultrasonic generator (USG)), factor B (TIP height), factor C (C/V), factor D (USG current), factor E (USG bond time), factor F (bond force), factor G (FS threshold), and factor H (FAB size). The quality characteristics of the process in the study, including the wire pull strength, the ball shear strength, the ball thickness difference, the ball size difference, and the percentage of the Au–Al intermetallic compound (IMC) are measured. The optimal process parameters that meet the requirements for multiple quality characteristics are A1B3C1D3E3F1G1H2. They are then used to be tested for verification. Experimental results confirm that the optimal process design indeed enhances the quality characteristics investigated. The analysis of variance (ANOVA) results also show that the most important control factors affecting the quality characteristics are factor B (TIP height), factor C (C/V), and factor G (FS threshold), which accounts for 72.34% of total process variance. Thus, they must be strictly monitored during processing.
|
Collections
Show full item record
| contributor author | Yih | |
| contributor author | Fu | |
| contributor author | Chih | |
| date accessioned | 2017-05-09T01:17:05Z | |
| date available | 2017-05-09T01:17:05Z | |
| date issued | 2015 | |
| identifier issn | 1528-9044 | |
| identifier other | ep_137_04_041004.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/157715 | |
| description abstract | This paper presents an integrated approach combining principal component analysis (PCA) and Taguchi methods to develop a ball grid array (BGA), gold (Au) wire bonding process with multiple quality characteristics optimization. Eight main process factors of BGA wire bonding technology are selected as the control factors for parameter design. They are the factor A (seating ultrasonic generator (USG)), factor B (TIP height), factor C (C/V), factor D (USG current), factor E (USG bond time), factor F (bond force), factor G (FS threshold), and factor H (FAB size). The quality characteristics of the process in the study, including the wire pull strength, the ball shear strength, the ball thickness difference, the ball size difference, and the percentage of the Au–Al intermetallic compound (IMC) are measured. The optimal process parameters that meet the requirements for multiple quality characteristics are A1B3C1D3E3F1G1H2. They are then used to be tested for verification. Experimental results confirm that the optimal process design indeed enhances the quality characteristics investigated. The analysis of variance (ANOVA) results also show that the most important control factors affecting the quality characteristics are factor B (TIP height), factor C (C/V), and factor G (FS threshold), which accounts for 72.34% of total process variance. Thus, they must be strictly monitored during processing. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Multiple Quality Characteristics Optimization of Ball Grid Array Wire Bonding Process | |
| type | Journal Paper | |
| journal volume | 137 | |
| journal issue | 4 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.4031471 | |
| journal fristpage | 41004 | |
| journal lastpage | 41004 | |
| identifier eissn | 1043-7398 | |
| tree | Journal of Electronic Packaging:;2015:;volume( 137 ):;issue: 004 | |
| contenttype | Fulltext |