Subcooled Boiling Heat Transfer for Cooling of Power Electronics in Hybrid Electric VehiclesSource: Journal of Electronic Packaging:;2015:;volume( 137 ):;issue: 003::page 31013DOI: 10.1115/1.4030896Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: At present, singlephase liquid, forced convection cooled heat sinks with fins are used to cool power electronics in hybrid electric vehicles (HEVs). Although use of fins in the cooling channels increases heat transfer rates considerably, a second lowtemperature radiator and associated pumping system are still required in HEVs. This additional cooling system adds weight and cost while decreasing the efficiency of HEVs. With the objective of eliminating this additional lowtemperature radiator and pumping system in HEVs, an alternative cooling technology, subcooled boiling in the cooling channels, was investigated in the present study. Numerical heat transfer simulations were performed using subcooled boiling in the power electronics cooling channels with the coolant supplied from the existing main engine cooling system. Results show that this subcooled boiling system is capable of removing 25% more heat from the power electronics than the conventional forced convection cooling technology, or it can reduce the junction temperature of the power electronics at the current heat removal rate. With the 25% increased heat transfer option, high heat fluxes up to 250 W/cm2 (typical for widebandgap semiconductor applications) are possible by using the subcooled boiling system.
|
Collections
Show full item record
| contributor author | Zhao, Weihuan | |
| contributor author | France, David M. | |
| contributor author | Yu, Wenhua | |
| contributor author | Singh, Dileep | |
| date accessioned | 2017-05-09T01:17:03Z | |
| date available | 2017-05-09T01:17:03Z | |
| date issued | 2015 | |
| identifier issn | 1528-9044 | |
| identifier other | ep_137_03_031013.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/157703 | |
| description abstract | At present, singlephase liquid, forced convection cooled heat sinks with fins are used to cool power electronics in hybrid electric vehicles (HEVs). Although use of fins in the cooling channels increases heat transfer rates considerably, a second lowtemperature radiator and associated pumping system are still required in HEVs. This additional cooling system adds weight and cost while decreasing the efficiency of HEVs. With the objective of eliminating this additional lowtemperature radiator and pumping system in HEVs, an alternative cooling technology, subcooled boiling in the cooling channels, was investigated in the present study. Numerical heat transfer simulations were performed using subcooled boiling in the power electronics cooling channels with the coolant supplied from the existing main engine cooling system. Results show that this subcooled boiling system is capable of removing 25% more heat from the power electronics than the conventional forced convection cooling technology, or it can reduce the junction temperature of the power electronics at the current heat removal rate. With the 25% increased heat transfer option, high heat fluxes up to 250 W/cm2 (typical for widebandgap semiconductor applications) are possible by using the subcooled boiling system. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Subcooled Boiling Heat Transfer for Cooling of Power Electronics in Hybrid Electric Vehicles | |
| type | Journal Paper | |
| journal volume | 137 | |
| journal issue | 3 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.4030896 | |
| journal fristpage | 31013 | |
| journal lastpage | 31013 | |
| identifier eissn | 1043-7398 | |
| tree | Journal of Electronic Packaging:;2015:;volume( 137 ):;issue: 003 | |
| contenttype | Fulltext |