Show simple item record

contributor authorMashadi, Behrooz
contributor authorGowdini, Meysam
date accessioned2017-05-09T01:16:51Z
date available2017-05-09T01:16:51Z
date issued2015
identifier issn0022-0434
identifier otherds_137_12_121007.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157649
description abstractIn this research, a gyroscopic device has been introduced for the purpose of vehicle handling enhancement. An optimal linear quadratic regulator controller (LQR) is designed based on the gyroscope–vehicle simple linear equations. This controller by using a gyroscope system is shown to enable the vehicle to follow the desired input. The desired vehicle dynamic motion is assumed in the form of the steady motion of the bicycle model. The desired motion for the gyroscope is a condition in which the gyroscope frame angular velocity is zero. A ten degreesoffreedom (DOF) full vehicle model, consisting of 9DOF for the nonlinear vehicle model including the Magic Formula tire model and a nonlinear 1DOF gyroscope model, is used for the simulation purposes. In various maneuvers, the performance of the gyroscopic system with that of the conventional direct yaw moment control (DYC) system performance is compared. Simulation results show that on dry and slippery roads, the performances of gyroscope system and DYC are both desirable. On a خ¼split road condition, DYC fails and is not effective whereas the gyroscope system has a very good performance.
publisherThe American Society of Mechanical Engineers (ASME)
titleVehicle Dynamics Control by Using an Active Gyroscopic Device
typeJournal Paper
journal volume137
journal issue12
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4031532
journal fristpage121007
journal lastpage121007
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record