Show simple item record

contributor authorMehdi Dehghan, S. M.
contributor authorMoradi, Hadi
contributor authorAsghar Shahidian, S. A.
date accessioned2017-05-09T01:16:49Z
date available2017-05-09T01:16:49Z
date issued2015
identifier issn0022-0434
identifier otherds_137_11_114502.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157639
description abstractDifferential received signal strength indicator (DRSSI), in which two separate received signal strength indicator (RSSI) measurements are used to localize an radio frequency (RF) source with unknown transmitted power, has been proposed to eliminate the need for estimating the strength of the transmitted signal in localization. In this paper, the problem of choosing the best pair of measurements, which can lead to closetominimum localization error based on Cramer–Rao lower bound (CRLB) analysis, is addressed. The analysis shows that the root mean squared error (RMSE) of localization decreases monotonically with the increase of the angle between two pairing measurements, with respect to the target, up to 180 deg. In other words, it is shown that the best pair of measurements consists of the measurement points which are inline with the target opposing each other. The second best pairing angle is near 135 deg with respect to the target. To practically show the importance of this analysis, several Monte Carlo simulation scenarios were conducted which show that the RMSE of localization would be closetominimum using the proposed analysis.
publisherThe American Society of Mechanical Engineers (ASME)
titlePair Selection Analysis in Differential RSSI Based Localization
typeJournal Paper
journal volume137
journal issue11
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4031046
journal fristpage114502
journal lastpage114502
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 011
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record