Show simple item record

contributor authorRussell, Douglas
contributor authorFleming, Andrew J.
contributor authorAphale, Sumeet S.
date accessioned2017-05-09T01:16:43Z
date available2017-05-09T01:16:43Z
date issued2015
identifier issn0022-0434
identifier otherds_137_10_101004.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157610
description abstractPositive velocity and position feedback (PVPF) is a widely used control scheme in lightly damped resonant systems with collocated sensor actuator pairs. The popularity of PVPF is due to the ability to achieve a chosen damping ratio by repositioning the poles of the system. The addition of a tracking controller, to reduce the effects of inherent nonlinearities, causes the poles to deviate from the intended location and can be a detriment to the damping achieved. By designing the PVPF and tracking controllers simultaneously, the optimal damping and tracking can be achieved. Simulations show full damping of the first resonance mode and significantly higher bandwidth than that achieved using the traditional PVPF design method, allowing for highspeed scanning with accurate tracking. Experimental results are also provided to verify performance in implementation.
publisherThe American Society of Mechanical Engineers (ASME)
titleSimultaneous Optimization of Damping and Tracking Controller Parameters Via Selective Pole Placement for Enhanced Positioning Bandwidth of Nanopositioners
typeJournal Paper
journal volume137
journal issue10
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4030723
journal fristpage101004
journal lastpage101004
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record