Show simple item record

contributor authorأ‡alؤ±ںkan, Hakan
contributor authorBalkan, Tuna
contributor authorPlatin, Bأ¼lent E.
date accessioned2017-05-09T01:16:40Z
date available2017-05-09T01:16:40Z
date issued2015
identifier issn0022-0434
identifier otherds_137_09_091008.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157595
description abstractThis paper addresses the stability problem of pump controlled asymmetric hydraulic actuators and proposes a physical solution for it. The system under consideration utilizes a shuttle valve to compensate for unequal flow rates due to the asymmetry in the actuator. Possible hydraulic circuit configurations resulting from various valve positions are defined on the load pressure versus velocity plane and a generalized linear model of the system is derived. The investigation shows that there exists a critical load pressure region in which any equilibrium point requiring a partially open spool position is unstable during the retraction of the actuator. A particular valve underlap is proposed in order to avoid the instability and a shuttle valve selection guide is presented. Theoretical findings are validated by both numerical simulations and experimental tests. Results show that the undesired pressure oscillations are removed up to certain actuator velocities with the use of an underlapped shuttle valve.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Complete Analysis and a Novel Solution for Instability in Pump Controlled Asymmetric Actuators
typeJournal Paper
journal volume137
journal issue9
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4030544
journal fristpage91008
journal lastpage91008
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record