Show simple item record

contributor authorLimebeer, D. J. N.
contributor authorPerantoni, G.
date accessioned2017-05-09T01:16:28Z
date available2017-05-09T01:16:28Z
date issued2015
identifier issn0022-0434
identifier otherds_137_05_051019.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157527
description abstractThe optimal control of a Formula One car on a threedimensional (3D) track is studied. The track is described by its geodesic and normal curvatures, and its relative torsion. These curvature parameters are obtained from noisy measurement data using the optimal estimation technique described in Part 1. The optimal control calculations presented are based on the aforementioned track model and a vehicle model that is responsive to the geometric features of a 3D track. For vehicle modeling purposes, the track is treated as a plane tangent to a nearby point on the track's spine. This tangent plane moves under the car and is orthogonal to the principal normal vector m at the nearby spine point. Results are presented that compare twodimensional (2D) and 3D minimumlaptime results, with the two compared. The Barcelona Formula One track studied in Part 1 is used again as an illustrative example.
publisherThe American Society of Mechanical Engineers (ASME)
titleOptimal Control of a Formula One Car on a Three Dimensional Track—Part 2: Optimal Control
typeJournal Paper
journal volume137
journal issue5
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4029466
journal fristpage51019
journal lastpage51019
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record