Show simple item record

contributor authorPitakwatchara, Phongsaen
date accessioned2017-05-09T01:16:12Z
date available2017-05-09T01:16:12Z
date issued2015
identifier issn0022-0434
identifier otherds_137_02_021001.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157444
description abstractThis paper addresses the task space impedance control of a robot driven through the multistage nonlinear flexible transmission. The proposed controller uses limited information of the angle and the current of the motors to regulate the end point compliance at the specified set point. In particular, motor angle is employed to estimate the stationary robot link angle and joint velocity in real time. They are then used to constitute the stationary force on the attempt to cancel the robot gravity force and to form the task space interacting force according to the desired impedance characteristics. Motor current is used to infer the transmitted torque to the robot. This torque is fed back to mitigate the effect of the motor inertia from deteriorating the desired impedance. Asymptotic stability of this controller with the flexible joint robot is guaranteed with additional damping. Passivity of the system is also investigated. Simulation and experiments of the proposed control scheme on a two degreesoffreedom (DOF) cablepulley driven flexible joint robot model are examined.
publisherThe American Society of Mechanical Engineers (ASME)
titleTask Space Impedance Control of the Manipulator Driven Through the Multistage Nonlinear Flexible Transmission
typeJournal Paper
journal volume137
journal issue2
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4028252
journal fristpage21001
journal lastpage21001
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2015:;volume( 137 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record