Solidification of Phase Change Materials Infiltrated in Porous Media in Presence of VoidsSource: Journal of Heat Transfer:;2014:;volume( 136 ):;issue: 011::page 112603DOI: 10.1115/1.4028354Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Infiltration of phase change materials (PCM) into highly conductive porous structures effectively enhances the thermal conductivity and phase change (solidification and melting) characteristics of the resulting thermal energy storage (TES) composites. However, the infiltration process contributes to formation of voids as micronsize air bubbles within the pores of the porous structure. The presence of voids negatively affects the thermal and phase change performance of TES composites due to the thermophysical properties of air in comparison with PCM and porous structure. This paper investigates the effect of voids on solidification of PCM, infiltrated into the pores of graphite foam as a highly conductive porous medium with interconnected pores. A combination of the volumeoffluid (VOF) and enthalpyporosity methods was employed for numerical investigation of solidification. The proposed method takes into account the variation of density with temperature during phase change and is able to predict the volume shrinkage (volume contraction) during the solidification of liquids. Furthermore, the presence of void and the temperature gradient along the liquid–gas interface (the interface between void and PCM) can trigger thermocapillary effects. Thus, Marangoni convection was included during the solidification process and its importance was elucidated by comparing the results among cases with and without thermocapillary effects. The results indicated that the presence of voids within the pores causes a noticeable increase in solidification time, with a sharper increase for cases without thermocapillary convection. For verification purposes, the amount of volume shrinkage during the solidification obtained from numerical simulations was compared against the theoretical volume change due to the variation of density for several liquids with contraction and expansion during the freezing process. The two sets of results exhibited good agreement.
|
Collections
Show full item record
| contributor author | Moeini Sedeh, Mahmoud | |
| contributor author | Khodadadi, J. M. | |
| date accessioned | 2017-05-09T01:09:46Z | |
| date available | 2017-05-09T01:09:46Z | |
| date issued | 2014 | |
| identifier issn | 0022-1481 | |
| identifier other | ht_136_11_112603.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/155408 | |
| description abstract | Infiltration of phase change materials (PCM) into highly conductive porous structures effectively enhances the thermal conductivity and phase change (solidification and melting) characteristics of the resulting thermal energy storage (TES) composites. However, the infiltration process contributes to formation of voids as micronsize air bubbles within the pores of the porous structure. The presence of voids negatively affects the thermal and phase change performance of TES composites due to the thermophysical properties of air in comparison with PCM and porous structure. This paper investigates the effect of voids on solidification of PCM, infiltrated into the pores of graphite foam as a highly conductive porous medium with interconnected pores. A combination of the volumeoffluid (VOF) and enthalpyporosity methods was employed for numerical investigation of solidification. The proposed method takes into account the variation of density with temperature during phase change and is able to predict the volume shrinkage (volume contraction) during the solidification of liquids. Furthermore, the presence of void and the temperature gradient along the liquid–gas interface (the interface between void and PCM) can trigger thermocapillary effects. Thus, Marangoni convection was included during the solidification process and its importance was elucidated by comparing the results among cases with and without thermocapillary effects. The results indicated that the presence of voids within the pores causes a noticeable increase in solidification time, with a sharper increase for cases without thermocapillary convection. For verification purposes, the amount of volume shrinkage during the solidification obtained from numerical simulations was compared against the theoretical volume change due to the variation of density for several liquids with contraction and expansion during the freezing process. The two sets of results exhibited good agreement. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Solidification of Phase Change Materials Infiltrated in Porous Media in Presence of Voids | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 11 | |
| journal title | Journal of Heat Transfer | |
| identifier doi | 10.1115/1.4028354 | |
| journal fristpage | 112603 | |
| journal lastpage | 112603 | |
| identifier eissn | 1528-8943 | |
| tree | Journal of Heat Transfer:;2014:;volume( 136 ):;issue: 011 | |
| contenttype | Fulltext |