Effects of Pulsation to the Mean Field and Vortex Development in a Backward Facing Step FlowSource: Journal of Fluids Engineering:;2014:;volume( 136 ):;issue: 001::page 11001DOI: 10.1115/1.4025608Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This work is concerned with the behavior of pulsatile flows over a backwardfacing step geometry. The paper mainly focuses on the effects of the pulsation frequency on the vortex development of a 2:1 backwardfacing step for mean Reynolds number of 100 and for 0.035 ≤ St ≤ 2.19. The dependence of the flow field on the Reynolds number (Re = 100 and 200) was also examined for a constant Strouhal number, St of 1. A literature survey was carried out and it was found that the pulsation modifies the behavior of the flow pattern compared to the steady flow. It was shown in the present work that the inlet pulsation generally leads to differences in the mean flow compared to the steady field although the inlet bulk velocity is the same due to energy redistribution of the largescale vortices, which result in nonlinear effects. The particleimage velocimetry results show that the formation of coherent structures, dynamical shedding, and transport procedure are very sensitive to the level of pulsation frequencies. For low and moderate inlet frequencies, 0.4 ≤ St ≤ 1, strong vortices are formed and these vortices are periodically advected downstream in an alternate pattern. For very low inlet frequency, St = 0.035, stronger vortices are generated due to an extended formation time, however, the slow formation process causes the forming vortices to decay before shedding can happen. For high inlet frequencies, St ≥ 2.19, primary vortex is weak while no secondary vortex is formed. Flow downstream of the expansion recovers quickly. For Re = 200, the pattern of vortex formation is similar to Re = 100. However, the primary and secondary vortices decay more slowly and the vortices remain stronger for Re = 200. The strength and structure of the vortical regions depends highly on St, but Re effects are not negligible.
|
Collections
Show full item record
| contributor author | Dol, Sharul S. | |
| contributor author | Salek, M. Mehdi | |
| contributor author | Martinuzzi, Robert J. | |
| date accessioned | 2017-05-09T01:08:20Z | |
| date available | 2017-05-09T01:08:20Z | |
| date issued | 2014 | |
| identifier issn | 0098-2202 | |
| identifier other | fe_136_01_011001.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/154916 | |
| description abstract | This work is concerned with the behavior of pulsatile flows over a backwardfacing step geometry. The paper mainly focuses on the effects of the pulsation frequency on the vortex development of a 2:1 backwardfacing step for mean Reynolds number of 100 and for 0.035 ≤ St ≤ 2.19. The dependence of the flow field on the Reynolds number (Re = 100 and 200) was also examined for a constant Strouhal number, St of 1. A literature survey was carried out and it was found that the pulsation modifies the behavior of the flow pattern compared to the steady flow. It was shown in the present work that the inlet pulsation generally leads to differences in the mean flow compared to the steady field although the inlet bulk velocity is the same due to energy redistribution of the largescale vortices, which result in nonlinear effects. The particleimage velocimetry results show that the formation of coherent structures, dynamical shedding, and transport procedure are very sensitive to the level of pulsation frequencies. For low and moderate inlet frequencies, 0.4 ≤ St ≤ 1, strong vortices are formed and these vortices are periodically advected downstream in an alternate pattern. For very low inlet frequency, St = 0.035, stronger vortices are generated due to an extended formation time, however, the slow formation process causes the forming vortices to decay before shedding can happen. For high inlet frequencies, St ≥ 2.19, primary vortex is weak while no secondary vortex is formed. Flow downstream of the expansion recovers quickly. For Re = 200, the pattern of vortex formation is similar to Re = 100. However, the primary and secondary vortices decay more slowly and the vortices remain stronger for Re = 200. The strength and structure of the vortical regions depends highly on St, but Re effects are not negligible. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Effects of Pulsation to the Mean Field and Vortex Development in a Backward Facing Step Flow | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 1 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.4025608 | |
| journal fristpage | 11001 | |
| journal lastpage | 11001 | |
| identifier eissn | 1528-901X | |
| tree | Journal of Fluids Engineering:;2014:;volume( 136 ):;issue: 001 | |
| contenttype | Fulltext |