A New Analytical Approach for Dynamic Modeling of Passive Multicomponent Cooling SystemsSource: Journal of Electronic Packaging:;2014:;volume( 136 ):;issue: 003::page 31010DOI: 10.1115/1.4027509Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A new onedimensional thermal network modeling approach is proposed that can accurately predict transient/dynamic temperature distribution of passive cooling systems. The present model has applications in variety of electronic, power electronic, photonics, and telecom systems, especially where the system load fluctuates over time. The main components of a cooling system including: heat spreaders, heat pipes, and heat sinks as well as thermal boundary conditions such as natural convection and radiation heat transfer are analyzed, analytically modeled and presented in the form of resistance and capacitance (RC) network blocks. The present model is capable of predicting the transient/dynamic (and steady state) thermal behavior of cooling system with significantly less cost of modeling compared to conventional numerical simulations. Furthermore, the present method takes into account system “thermal inertia†and is capable of capturing thermal lags in various components. The model is presented in two forms: zerodimensional and onedimensional which are different in terms of complicacy. A customdesigned testbed is also built and a comprehensive experimental study is conducted to validate the proposed model. The experimental results show great agreement, less than 4.5% relative difference in comparison with the modeling results.
|
Collections
Show full item record
| contributor author | Gholami, A. | |
| contributor author | Ahmadi, M. | |
| contributor author | Bahrami, M. | |
| date accessioned | 2017-05-09T01:06:50Z | |
| date available | 2017-05-09T01:06:50Z | |
| date issued | 2014 | |
| identifier issn | 1528-9044 | |
| identifier other | ep_136_03_031010.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/154482 | |
| description abstract | A new onedimensional thermal network modeling approach is proposed that can accurately predict transient/dynamic temperature distribution of passive cooling systems. The present model has applications in variety of electronic, power electronic, photonics, and telecom systems, especially where the system load fluctuates over time. The main components of a cooling system including: heat spreaders, heat pipes, and heat sinks as well as thermal boundary conditions such as natural convection and radiation heat transfer are analyzed, analytically modeled and presented in the form of resistance and capacitance (RC) network blocks. The present model is capable of predicting the transient/dynamic (and steady state) thermal behavior of cooling system with significantly less cost of modeling compared to conventional numerical simulations. Furthermore, the present method takes into account system “thermal inertia†and is capable of capturing thermal lags in various components. The model is presented in two forms: zerodimensional and onedimensional which are different in terms of complicacy. A customdesigned testbed is also built and a comprehensive experimental study is conducted to validate the proposed model. The experimental results show great agreement, less than 4.5% relative difference in comparison with the modeling results. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A New Analytical Approach for Dynamic Modeling of Passive Multicomponent Cooling Systems | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 3 | |
| journal title | Journal of Electronic Packaging | |
| identifier doi | 10.1115/1.4027509 | |
| journal fristpage | 31010 | |
| journal lastpage | 31010 | |
| identifier eissn | 1043-7398 | |
| tree | Journal of Electronic Packaging:;2014:;volume( 136 ):;issue: 003 | |
| contenttype | Fulltext |