Show simple item record

contributor authorMilenkovic, Paul
date accessioned2017-05-09T01:06:41Z
date available2017-05-09T01:06:41Z
date issued2014
identifier issn0022-0434
identifier otherds_136_06_061001.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154422
description abstractThe Hermite–Obreshkov–Padأ© (HOP) method of numerical integration is applicable to stiff systems of differential equations, where the linearization has large range of eigenvalues. A practical implementation of HOP requires the ability to determine highorder time derivatives of the system variables. In the case of a constrained multibody dynamical system, the power series solution for the kinematic differential equation is the foundation for an algorithmic differentiation (AD) procedure determining those derivatives. The AD procedure is extended in this paper to determine rates of change in the time derivatives with respect to variation in the position and velocity state variables of the multibody system. The coefficients of this variation form the Jacobian matrix required for Newton–Raphson iteration. That procedure solves the implicit relations for the state variables at the end of each integration time step. The resulting numerical method is applied to the rotation of a dynamically unbalanced constantvelocity (CV) shaft coupling, where the deflection angle of the output shaft is constrained to low levels by springs of high rate and damping.
publisherThe American Society of Mechanical Engineers (ASME)
titleNumerical Solution of Stiff Multibody Dynamic Systems Based on Kinematic Derivatives
typeJournal Paper
journal volume136
journal issue6
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4028049
journal fristpage61001
journal lastpage61001
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record