Show simple item record

contributor authorMoberg, Stig
contributor authorWernholt, Erik
contributor authorHanssen, Sven
contributor authorBrogأ¥rdh, Torgny
date accessioned2017-05-09T01:06:21Z
date available2017-05-09T01:06:21Z
date issued2014
identifier issn0022-0434
identifier otherds_136_03_031005.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154318
description abstractThis paper considers the problem of dynamic modeling and identification of robot manipulators with respect to their elasticities. The socalled flexible joint model, modeling only the torsional gearbox elasticity, is shown to be insufficient for modeling a modern industrial manipulator accurately. Another lumped parameter model, called the extended flexible joint model, is therefore used to improve the model accuracy. In this model, nonactuated joints are added to model the elasticity of the links and bearings. The unknown elasticity parameters are estimated using a frequencydomain graybox identification method. The conclusion is that the obtained model describes the movements of the motors and the tool mounted on the robot with significantly higher accuracy than the flexible joint model. Similar elasticity model parameters are obtained when using two different output variables for the identification, the motor position and the tool acceleration.
publisherThe American Society of Mechanical Engineers (ASME)
titleModeling and Parameter Estimation of Robot Manipulators Using Extended Flexible Joint Models
typeJournal Paper
journal volume136
journal issue3
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4026300
journal fristpage31005
journal lastpage31005
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record