Show simple item record

contributor authorOlsen, Scott G.
contributor authorBone, Gary M.
date accessioned2017-05-09T01:06:20Z
date available2017-05-09T01:06:20Z
date issued2014
identifier issn0022-0434
identifier otherds_136_02_024502.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154309
description abstractThis brief paper investigates the control of a robotic bulldozing operation. Optimal blade position control laws were designed based on a hybrid dynamic model to maximize the predicted material removal rate of the bulldozing process. Experiments were conducted with a scaleddown robotic bulldozing system. The control laws were implemented with various tuning values. As a comparison, a rulebased blade control algorithm was also designed and implemented. The experimental results with the best optimal controller demonstrated a 33% increase in the average material removal rate compared to the rulebased controller.
publisherThe American Society of Mechanical Engineers (ASME)
titleModel Based Control of Three Degrees of Freedom Robotic Bulldozing
typeJournal Paper
journal volume136
journal issue2
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4025861
journal fristpage24502
journal lastpage24502
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record