Show simple item record

contributor authorRoebuck, Richard
contributor authorOdhams, Andrew
contributor authorTagesson, Kristoffer
contributor authorCheng, Caizhen
contributor authorCebon, David
date accessioned2017-05-09T01:06:19Z
date available2017-05-09T01:06:19Z
date issued2014
identifier issn0022-0434
identifier otherds_136_02_021016.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154299
description abstractA highspeed pathfollowing controller for long combination vehicles (LCVs) was designed and implemented on a test vehicle consisting of a rigid truck towing a dolly and a semitrailer. The vehicle was driven through a 3.5 m wide lane change maneuver at 80 km/h. The axles of the dolly and trailer were steered actively by electricallycontrolled hydraulic actuators. Substantial performance benefits were recorded compared with the unsteered vehicle. For the best controller weightings, performance improvements relative to unsteered case were: lateral tracking error 75% reduction, rearward amplification (RA) of lateral acceleration 18% reduction, and RA of yaw rate 37% reduction. This represents a substantial improvement in stability margins. The system was found to work well in conjunction with the brakingbased stability control system of the towing vehicle with no negative interaction effects being observed. In all cases, the stability control system and the steering system improved the yaw stability of the combination.
publisherThe American Society of Mechanical Engineers (ASME)
titleImplementation of Trailer Steering Control on a Multi Unit Vehicle at High Speeds
typeJournal Paper
journal volume136
journal issue2
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4025815
journal fristpage21016
journal lastpage21016
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2014:;volume( 136 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record