Predicting Rough Wall Heat Transfer and Skin Friction in Transitional Boundary Layers—A New Correlation for Bypass Transition Onset

Abstract

This paper summarizes the experimental results of a comprehensive study on the heat transfer and aerodynamic losses of a highly loaded turbine blade with surface roughness. A few hundred test cases conducted at several Reynolds numbers, freestream turbulence levels, and different deterministic roughness geometry have been examined. Some of these results have been published in two previous papers, showing a strong effect of roughness on laminarturbulent bypass transition on the airfoil suction side. Beside roughness height, roughness anisotropy has turned out to be one of the major influencing factors. The airfoil heat transfer distribution of these measurements is used for detecting the transition onset. Additionally, further transition onset data from the literature is reevaluated. Thus, important roughness (geometry) parameters are identified and a new correlation for the transition onset is deduced, including roughness parameters along with freestream turbulence. Moreover, a method to extract the relevant roughness parameters from realistic surface roughness is presented. Additional heat transfer and aerodynamic measurements are conducted for two different real surface roughness types. Calculations with a 2Dboundary layer code on these surfaces are presented in order to validate the new model.