Multi Layer Mini Channel and Ribbed Mini Channel Based High Performance Cooling Configurations for Automotive Inverters—Part A: Design and EvaluationSource: Journal of Thermal Science and Engineering Applications:;2013:;volume( 005 ):;issue: 003::page 31010DOI: 10.1115/1.4023604Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Necessitated by the dwindling supply of petroleum resources, various new automotive technologies have been actively developed from the perspective of achieving energy security and diversifying energy sources. Hybrid electric vehicles and electric vehicles are a few such examples. Such diversification requires the use of power control units essentially for power control, power conversion, and power conditioning applications such as variable speed motor drives (dc–ac conversion), dc–dc converters and other similar devices. The power control unit of a hybrid electric vehicle or electric vehicle is essentially the brain of the hybrid system as it manages the power flow between the electric motor generator, battery and gas engine. Over the last few years, the performance of this power control unit has been improved and size has been reduced to attain higher efficiency and performance, causing the heat dissipation as well as heat density to increase significantly. Efforts are constantly being made to reduce this size even further. As a consequence, a better high performance cooler/heat exchanger is required to maintain the active devices temperature within optimum range. Cooling schemes based on multiple parallel channels are a few solutions which have been widely used to dissipate transient and steady concentrated heat loads and can be applied to existing cooling system with minor modifications. The aim of the present study has therefore been to study the various cooling options based on minichannel and ribturbulated minichannel cooling for application in a hybrid electric vehicle and other similar consumer products, and perform a parametric and optimization study on the selected designs. Significant improvements in terms of thermal performance, reduced overall pressure drop, and volume reduction have been shown both experimentally and numerically. This paper is the first part in a two part submission and focuses on the design and evaluation of minichannel and ribturbulated minichannel cooling configurations. The second part of this paper discusses the manufacturing and testing of the cooling device.
|
Show full item record
| contributor author | Parida, Pritish R. | |
| contributor author | Ekkad, Srinath V. | |
| contributor author | Ngo, Khai | |
| date accessioned | 2017-05-09T01:02:53Z | |
| date available | 2017-05-09T01:02:53Z | |
| date issued | 2013 | |
| identifier issn | 1948-5085 | |
| identifier other | tsea_5_3_031010.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/153247 | |
| description abstract | Necessitated by the dwindling supply of petroleum resources, various new automotive technologies have been actively developed from the perspective of achieving energy security and diversifying energy sources. Hybrid electric vehicles and electric vehicles are a few such examples. Such diversification requires the use of power control units essentially for power control, power conversion, and power conditioning applications such as variable speed motor drives (dc–ac conversion), dc–dc converters and other similar devices. The power control unit of a hybrid electric vehicle or electric vehicle is essentially the brain of the hybrid system as it manages the power flow between the electric motor generator, battery and gas engine. Over the last few years, the performance of this power control unit has been improved and size has been reduced to attain higher efficiency and performance, causing the heat dissipation as well as heat density to increase significantly. Efforts are constantly being made to reduce this size even further. As a consequence, a better high performance cooler/heat exchanger is required to maintain the active devices temperature within optimum range. Cooling schemes based on multiple parallel channels are a few solutions which have been widely used to dissipate transient and steady concentrated heat loads and can be applied to existing cooling system with minor modifications. The aim of the present study has therefore been to study the various cooling options based on minichannel and ribturbulated minichannel cooling for application in a hybrid electric vehicle and other similar consumer products, and perform a parametric and optimization study on the selected designs. Significant improvements in terms of thermal performance, reduced overall pressure drop, and volume reduction have been shown both experimentally and numerically. This paper is the first part in a two part submission and focuses on the design and evaluation of minichannel and ribturbulated minichannel cooling configurations. The second part of this paper discusses the manufacturing and testing of the cooling device. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Multi Layer Mini Channel and Ribbed Mini Channel Based High Performance Cooling Configurations for Automotive Inverters—Part A: Design and Evaluation | |
| type | Journal Paper | |
| journal volume | 5 | |
| journal issue | 3 | |
| journal title | Journal of Thermal Science and Engineering Applications | |
| identifier doi | 10.1115/1.4023604 | |
| journal fristpage | 31010 | |
| journal lastpage | 31010 | |
| identifier eissn | 1948-5093 | |
| tree | Journal of Thermal Science and Engineering Applications:;2013:;volume( 005 ):;issue: 003 | |
| contenttype | Fulltext |