Comparative Analysis of Crystalline and Double Junction Amorphous Silicon Modules Performance in Outdoor Conditions

Abstract

The paper deals with an extensive photovoltaic (PV) modules monitoring activity carried out at the outdoor station ESTER (Solar Energy TEst and Research) of the University of Rome Tor Vergata, Italy. The purpose of the work was to evaluate and compare the performance of PV silicon modules of polycrystalline (poliSi) and amorphous (aSi) technologies during a mediumterm outdoor exposure at optimized tilt angle, facing south. Two PV modules, one polycrystalline silicon and one doublejunction amorphous silicon, have been exposed since May 2009 until Oct. 2010. A complete characterization of the weather conditions at the site during the test has been performed, and the most relevant parameters for the performance comparison of the two technologies have been derived. In order to compare different technologies and power productions, the energy yield (Y) and performance ratio (PR) for the two modules have been evaluated on a monthly and yearly basis. The typical seasonal trend of PR has been observed for the polycrystalline module, essentially due to the temperature influence on the module performance. For the aSi module, instead, a degradation trend has been observed for the first months of operation. Subsequently, a significant recovery in the PR and energy production has been registered.