Effect of the Ratio Spread of CVU in Automotive Kinetic Energy Recovery Systems

Abstract

The Kinetic Energy Recovery Systems (KERS) are being considered as promising shortrange solution to improve the fuel economy of road vehicles. The key element of a mechanical hybrid is a Continuously Variable Unit (CVU), which is used to drive the power from the flywheel to the wheels and vice versa by varying the speed ratio. The performance of the KERS is very much affected by the efficiency of the CVU in both direct and reverse operation, and the ratio spread. However, in real Continuously Variable Transmissions (CVT), the ratio spread is limited (typical value is 6) to keep acceptable efficiency and to minimize wear. Extended range shunted CVT (Power Split CVT or PSCVT), made of one CVT, one fixedratio drive and one planetary gear drive, permit the designer to arrange a CVU with a larger ratio spread than the CVT or to improve its basic efficiency. For these reasons, in the literature they are sometimes addressed as devices for proficient application to KERS. In this paper, two performance indexes have been defined to quantify the effect of the ratio spread of PSCVT on the energy recovery capabilities and overall roundtrip efficiency of KERS. It is found that no substantial benefit is achieved with the use of PSCVT instead of direct drive CVT, because the extension of the speed ratio range is paid with a loss of efficiency. It is finally discussed if new generation highefficiency CVTs can change the scenario.