YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Engineering for Gas Turbines and Power
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Engineering for Gas Turbines and Power
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Emission Reduction of Fuel Staged Aircraft Engine Combustor Using an Additional Premixed Fuel Nozzle

    Source: Journal of Engineering for Gas Turbines and Power:;2013:;volume( 135 ):;issue: 003::page 31502
    Author:
    Yamamoto, Takeshi
    ,
    Shimodaira, Kazuo
    ,
    Yoshida, Seiji
    ,
    Kurosawa, Yoji
    DOI: 10.1115/1.4007868
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The Japan Aerospace Exploration Agency (JAXA) is conducting research and development on aircraft engine technologies to reduce environmental impact for the Technology Development Project for Clean Engines (TechCLEAN). As a part of the project, combustion technologies have been developed with an aggressive target that is an 80% reduction over the NOx threshold of the International Civil Aviation Organization (ICAO) Committee on Aviation Environmental Protection (CAEP)/4 standard. A staged fuel nozzle with a pilot mixer and a main mixer was developed and tested using a singlesector combustor under the target engine's landing and takeoff (LTO) cycle conditions with a rated output of 40 kN and an overall pressure ratio of 25.8. The test results showed a 77% reduction over the CAEP/4 NOx standard. However, the reduction in smoke at thrust conditions higher than the 30% MTO condition and of CO emission at thrust conditions lower than the 85% MTO condition are necessary. In the present study, an additional fuel burner was designed and tested with the staged fuel nozzle in a singlesector combustor to control emissions. The test results show that the combustor enables an 82% reduction in NOx emissions relative to the ICAO CAEP/4 standard and a drastic reduction in smoke and CO emissions.
    • Download: (3.450Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Emission Reduction of Fuel Staged Aircraft Engine Combustor Using an Additional Premixed Fuel Nozzle

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/151582
    Collections
    • Journal of Engineering for Gas Turbines and Power

    Show full item record

    contributor authorYamamoto, Takeshi
    contributor authorShimodaira, Kazuo
    contributor authorYoshida, Seiji
    contributor authorKurosawa, Yoji
    date accessioned2017-05-09T00:58:07Z
    date available2017-05-09T00:58:07Z
    date issued2013
    identifier issn1528-8919
    identifier othergtp_135_3_031502.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151582
    description abstractThe Japan Aerospace Exploration Agency (JAXA) is conducting research and development on aircraft engine technologies to reduce environmental impact for the Technology Development Project for Clean Engines (TechCLEAN). As a part of the project, combustion technologies have been developed with an aggressive target that is an 80% reduction over the NOx threshold of the International Civil Aviation Organization (ICAO) Committee on Aviation Environmental Protection (CAEP)/4 standard. A staged fuel nozzle with a pilot mixer and a main mixer was developed and tested using a singlesector combustor under the target engine's landing and takeoff (LTO) cycle conditions with a rated output of 40 kN and an overall pressure ratio of 25.8. The test results showed a 77% reduction over the CAEP/4 NOx standard. However, the reduction in smoke at thrust conditions higher than the 30% MTO condition and of CO emission at thrust conditions lower than the 85% MTO condition are necessary. In the present study, an additional fuel burner was designed and tested with the staged fuel nozzle in a singlesector combustor to control emissions. The test results show that the combustor enables an 82% reduction in NOx emissions relative to the ICAO CAEP/4 standard and a drastic reduction in smoke and CO emissions.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleEmission Reduction of Fuel Staged Aircraft Engine Combustor Using an Additional Premixed Fuel Nozzle
    typeJournal Paper
    journal volume135
    journal issue3
    journal titleJournal of Engineering for Gas Turbines and Power
    identifier doi10.1115/1.4007868
    journal fristpage31502
    journal lastpage31502
    identifier eissn0742-4795
    treeJournal of Engineering for Gas Turbines and Power:;2013:;volume( 135 ):;issue: 003
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian