Show simple item record

contributor authorChuang, Ning
contributor authorPetersen, Ian R.
date accessioned2017-05-09T00:57:35Z
date available2017-05-09T00:57:35Z
date issued2013
identifier issn0022-0434
identifier otherds_135_06_064501.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151387
description abstractThis paper describes an Hâˆ‍ control method for controlling hysteresis in a piezoelectric stack actuator. The actuator used is a highperformance monolithic multilayer piezoelectric stack actuator. The proposed control method involves the use of a capacitor in series with the piezoelectric actuator to provide a measured output voltage which is proportional to the charge on the piezoelectric actuator. The controller is designed based on a model of the hysteresis nonlinearity constructed using experimental data. The parameters in the nonlinear model of the system are obtained from the measurements on the piezoelectric actuator circuit. Our focus in this paper is to develop a tracking controller based on a charge output of the piezoelectric actuator system and to reduce the hysteresis nonlinearity. The paper considers a robust Hâˆ‍ tracking controller to control the piezoelectric actuator based on an uncertain system model. Experimental results show that the hysteresis can be significantly reduced and the measured output can closely track a 5 Hz sawtooth reference input signal when the Hâˆ‍ controller is used.
publisherThe American Society of Mechanical Engineers (ASME)
titleRobust Hâˆ‍ Control of Hysteresis in a Piezoelectric Stack Actuator1
typeJournal Paper
journal volume135
journal issue6
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4024811
journal fristpage64501
journal lastpage64501
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record