Show simple item record

contributor authorDoraiswami, Rajamani
contributor authorCheded, Lahouari
date accessioned2017-05-09T00:57:27Z
date available2017-05-09T00:57:27Z
date issued2013
identifier issn0022-0434
identifier otherds_135_05_051002.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151341
description abstractThis paper proposes a modelbased approach to develop a novel fault diagnosis scheme for a sensor network of a cascade, parallel and feedback combination of subsystems. The objective is to detect and isolate a fault in any of the subsystems and measurement sensors which are subject to disturbances and/or measurement noise. Our approach hinges on the use of a bank of Kalman filters (KF) to detect and isolate faults. Each KF is driven by either a pair (a) of consecutive sensor measurements or (b) of a reference input and a measurement. It is shown that the KF residual is a reliable indicator of a fault in subsystems and sensors located in the path between the pair of the KF's input. The simple and efficient procedure proposed here analyzes each of the associated paths and leads to both the detection and isolation of any fault that occurred in the paths analyzed. The scheme is successfully evaluated on several simulated examples and on a physical fluid system exemplified by a benchmarked laboratoryscale twotank system to detect and isolate faults including sensor, actuator and leakage ones.
publisherThe American Society of Mechanical Engineers (ASME)
titleFault Diagnosis of a Sensor Network: A Distributed Filtering Approach
typeJournal Paper
journal volume135
journal issue5
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4023894
journal fristpage51002
journal lastpage51002
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record