Show simple item record

contributor authorJujnovich, B. A.
contributor authorCebon, D.
date accessioned2017-05-09T00:57:21Z
date available2017-05-09T00:57:21Z
date issued2013
identifier issn0022-0434
identifier otherds_135_3_031006.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151294
description abstractPassive steering systems have been used for some years to control the steering of trailer axles on articulated vehicles. These normally use a “command steerâ€‌ control strategy, which is designed to work well in steadystate circles at low speeds, but which generates inappropriate steer angles during transient lowspeed maneuvers and at high speeds. In this paper, “activeâ€‌ steering control strategies are developed for articulated heavy goods vehicles. These aim to achieve accurate path following for tractor and trailer, for all paths and all normal vehicle speeds, in the presence of external disturbances. Controllers are designed to implement the pathfollowing strategies at low and high speeds, whilst taking into account the complexities and practicalities of articulated vehicles. At low speeds, the articulation and steer angles on articulated heavy goods vehicles are large and smallangle approximations are not appropriate. Hence, nonlinear controllers based on kinematics are required. But at highspeeds, the dynamic stability of control system is compromised if the kinematicsbased controllers remain active. This is because a key state of the system, the sideslip characteristics of the trailer, exhibits a signchange with increasing speeds. The low and high speed controllers are blended together using a speeddependent gain, in the intermediate speed range. Simulations are conducted to compare the performance of the new steering controllers with conventional vehicles (with unsteered drive and trailer axles) and with vehicles with command steer controllers on their trailer axles. The simulations show that active steering has the potential to improve significantly the directional performance of articulated vehicles for a wide range of conditions, throughout the speed range.
publisherThe American Society of Mechanical Engineers (ASME)
titlePath Following Steering Control for Articulated Vehicles
typeJournal Paper
journal volume135
journal issue3
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4023396
journal fristpage31006
journal lastpage31006
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2013:;volume( 135 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record