Show simple item record

contributor authorShifang Li
contributor authorIlya V. Kolmanovsky
contributor authorA. Galip Ulsoy
date accessioned2017-05-09T00:49:09Z
date available2017-05-09T00:49:09Z
date copyrightJuly, 2012
date issued2012
identifier issn0022-0434
identifier otherJDSMAA-26589#041013_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/148476
description abstractA distributed supervisory controller is proposed to achieve battery component swapping modularity (CSM) for a plug-in hybrid electric vehicle (PHEV). The CSM permits the designer to distribute a part of the supervisory controller to the battery module such that the PHEV can use a range of batteries while providing corresponding optimal fuel economy. A novel feedback-based controller for the charge sustaining mode is proposed to facilitate distributed controller design for battery CSM. The method based on sensitivity analysis of the control signals with respect to the battery hardware parameter is introduced to define the controller distribution architecture. The distributed controller gains are obtained by solving a bilevel optimization problem using the collaborative optimization and the augmented Lagrangian decomposition methods. The simulation results demonstrate that the proposed distributed controller can achieve battery CSM without compromising fuel economy compared to the centralized control case.
publisherThe American Society of Mechanical Engineers (ASME)
titleDistributed Supervisory Controller Design for Battery Swapping Modularity in Plug-In Hybrid Electric Vehicles
typeJournal Paper
journal volume134
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4006214
journal fristpage41013
identifier eissn1528-9028
keywordsControl equipment
keywordsBatteries
keywordsOptimization AND Vehicles
treeJournal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record