YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Measurement of Average Contact Angles of Gas Diffusion Layers Using a Novel Fluorescence Microscopy Method

    Source: Journal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 002::page 21006
    Author:
    B. R. Friess
    ,
    M. Hoorfar
    DOI: 10.1115/1.4002584
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: One of the major problems of current proton exchange membrane (PEM) fuel cells is water management. The gas diffusion layer (GDL) of the fuel cell plays an important role in water management since humidification and water removal are both achieved through the GDL. Various numerical models were developed to illustrate the multiphase flow and transport in the fuel cell. The accuracy of these models depends on the accurate measurement of the GDL properties such as wettability, surface energy, and porosity. Most of the studies conducted for measuring the wettability of the GDL are based on the external contact angle measurements. However, the external contact angle does not describe adequately the capillary forces acting on the water inside the GDL pores. In a recent study, the capillary penetration technique has been used to measure indirectly the wettability of the GDL based on the experimental height increase due to penetration of the liquid into the porous sample. In essence, the height penetration technique was used along with the general Washburn equation to determine the surface properties of GDLs [ and , 2010, “Measurement of Internal Wettability of Gas Diffusion Porous Media of PEM Fuel Cells,” J. Power Sources, 195, pp. 4736–4742]. The shortcoming of this method is that it is only effective for thin GDL samples with low poly(tetrafluoroethylene) (PTFE) loading since the digital images acquired to find the height of penetration has a limited contrast between the penetrated and unpenetrated areas. Since fuel cells need to use different combinations of PTFE loading and thickness depending on the desired use of the cell, it is important to find a way to measure the contact angle of the GDLs with different PTFE loadings and thicknesses. This paper presents a novel fluorescence microscopy method that drastically improves the contrast in the images and allows for the accurate measurement of the height of penetration of the test liquid at each time step. This penetrated height values are then used along with an optimization method (which finds the best fit between the general Washburn equation and the experimental data) to calculate the contact angle of the test liquid on the GDL sample.
    keyword(s): Fluorescence , Optimization , Microscopy , Equations , Gas diffusion layers AND Water ,
    • Download: (324.7Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Measurement of Average Contact Angles of Gas Diffusion Layers Using a Novel Fluorescence Microscopy Method

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/146499
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorB. R. Friess
    contributor authorM. Hoorfar
    date accessioned2017-05-09T00:44:41Z
    date available2017-05-09T00:44:41Z
    date copyrightApril, 2011
    date issued2011
    identifier issn2381-6872
    identifier otherJFCSAU-28947#021006_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146499
    description abstractOne of the major problems of current proton exchange membrane (PEM) fuel cells is water management. The gas diffusion layer (GDL) of the fuel cell plays an important role in water management since humidification and water removal are both achieved through the GDL. Various numerical models were developed to illustrate the multiphase flow and transport in the fuel cell. The accuracy of these models depends on the accurate measurement of the GDL properties such as wettability, surface energy, and porosity. Most of the studies conducted for measuring the wettability of the GDL are based on the external contact angle measurements. However, the external contact angle does not describe adequately the capillary forces acting on the water inside the GDL pores. In a recent study, the capillary penetration technique has been used to measure indirectly the wettability of the GDL based on the experimental height increase due to penetration of the liquid into the porous sample. In essence, the height penetration technique was used along with the general Washburn equation to determine the surface properties of GDLs [ and , 2010, “Measurement of Internal Wettability of Gas Diffusion Porous Media of PEM Fuel Cells,” J. Power Sources, 195, pp. 4736–4742]. The shortcoming of this method is that it is only effective for thin GDL samples with low poly(tetrafluoroethylene) (PTFE) loading since the digital images acquired to find the height of penetration has a limited contrast between the penetrated and unpenetrated areas. Since fuel cells need to use different combinations of PTFE loading and thickness depending on the desired use of the cell, it is important to find a way to measure the contact angle of the GDLs with different PTFE loadings and thicknesses. This paper presents a novel fluorescence microscopy method that drastically improves the contrast in the images and allows for the accurate measurement of the height of penetration of the test liquid at each time step. This penetrated height values are then used along with an optimization method (which finds the best fit between the general Washburn equation and the experimental data) to calculate the contact angle of the test liquid on the GDL sample.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleMeasurement of Average Contact Angles of Gas Diffusion Layers Using a Novel Fluorescence Microscopy Method
    typeJournal Paper
    journal volume8
    journal issue2
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.4002584
    journal fristpage21006
    identifier eissn2381-6910
    keywordsFluorescence
    keywordsOptimization
    keywordsMicroscopy
    keywordsEquations
    keywordsGas diffusion layers AND Water
    treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian