Show simple item record

contributor authorAlexander C. Probst
contributor authorMario E. Magaña
contributor authorOliver Sawodny
date accessioned2017-05-09T00:43:03Z
date available2017-05-09T00:43:03Z
date copyrightMarch, 2011
date issued2011
identifier issn0022-0434
identifier otherJDSMAA-26546#024505_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/145737
description abstractThis paper presents procedures to handle time delays in a feedback control loop in which both measurement and control signals are sent through a network, where random time delays occur. Even when time stamps are utilized, for example, the control signal time delay still must be estimated. Using a Padé approximation and a Kalman filter, we can estimate the mean time delay. Furthermore, methods are described to estimate the time delay of every packet instead of the mean for the measurement channel, which greatly enhances the performance of the Padé approximation approach. This is done by matching the measurements to the expected measurements provided by the filter with maximum likelihood. The methods are applied to an inverted pendulum to assess performance.
publisherThe American Society of Mechanical Engineers (ASME)
titleCompensating Random Time Delays in a Feedback Networked Control System With a Kalman Filter
typeJournal Paper
journal volume133
journal issue2
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4003094
journal fristpage24505
identifier eissn1528-9028
keywordsDelays
keywordsKalman filters AND Feedback
treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record