Show simple item record

contributor authorStan van der Meulen
contributor authorRokus van Iperen
contributor authorBram de Jager
contributor authorFrancis van der Sluis
contributor authorMaarten Steinbuch
contributor authorFrans Veldpaus
date accessioned2017-05-09T00:43:00Z
date available2017-05-09T00:43:00Z
date copyrightJuly, 2011
date issued2011
identifier issn0022-0434
identifier otherJDSMAA-26556#041004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/145692
description abstractA reduction in the fuel consumption of a passenger car with a pushbelt continuously variable transmission (CVT) can be established via optimization of the hydraulic actuation system. This requires a model of the dynamic characteristics with low complexity and high accuracy, e.g., for closed-loop control design, for closed-loop simulation, and for optimization of design parameters. The hydraulic actuation system includes a large number of hydraulic components and a model of the dynamic characteristics is scarce, which is caused by the complexity, the nonlinearity, and the necessity of a large number of physical parameters that are uncertain or unknown. In this paper, a modular model for the hydraulic actuation system on the basis of first principles is constructed and validated, which is characterized by a relatively low complexity and a reasonably high accuracy. A modular approach is pursued with respect to the first principles models of the hydraulic components, i.e., a hydraulic pump, spool valves, proportional solenoid valves, channels, and hydraulic cylinders, which reduces complexity and improves transparency. The model parameters are either directly provided, directly measured, or identified. The model of the hydraulic actuation system is composed of the models of the hydraulic components and is experimentally validated by means of measurements that are obtained from a production pushbelt CVT. Several experiment types are considered. The correspondence between the measured and simulated responses is fairly good.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Validated Modular Model for Hydraulic Actuation in a Pushbelt Continuously Variable Transmission
typeJournal Paper
journal volume133
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4003207
journal fristpage41004
identifier eissn1528-9028
keywordsForce
keywordsValves
keywordsSolenoids
keywordsPressure
keywordsHydraulic pumps
keywordsFlow (Dynamics) AND Measurement
treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record