YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Cost-Effective Single Step Cofiring Process for Manufacturing Solid Oxide Fuel Cells Using HSC™ Anode

    Source: Journal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 002::page 21010
    Author:
    Kyung Joong Yoon
    ,
    Guosheng Ye
    ,
    Srikanth Gopalan
    ,
    Uday B. Pal
    DOI: 10.1115/1.3177449
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The anode-supported planar solid oxide fuel cell (SOFC) was fabricated by a cost-effective single step cofiring process using high shear compaction (HSC)™ anode substrate. The HSC™ process is a novel ceramic tape fabrication technique, which offers advantages in low-cost and high-volume production of the anode substrates over the conventional tape forming processes. The cell was comprised of a porous HSC™ Ni+8 mol % yttria-stabilized zirconia (YSZ) anode substrate, a porous Ni+YSZ anode barrier layer, a porous and fine-grained Ni+YSZ anode active layer, a dense YSZ electrolyte, a porous and fine-grained Ca-doped LaMnO3(LCM)+YSZ composite cathode active layer, and a porous LCM cathode current collector layer. The fabrication process involved wet powder spraying of the anode barrier layer over the HSC™ anode substrate followed by screen-printing of the remaining component layers. The cell was then cofired at 1340°C for 2 h. The microstructure and the open circuit voltage of the cell confirmed that the cell was crack-free and leak-tight. The cofired cell showed a stable and acceptable electrochemical performance at 800°C under humidified hydrogen (3–60% H2O) as fuel and air as oxidant. The anode active layer with finer and less porous microstructure increased the triple phase boundary length and improved cell performance under conditions that simulated higher fuel utilization. The material system and fabrication process presented in this work offers great advantage in low-cost and high-volume production of SOFCs, and it can be the basis for scale-up and successful commercialization of the SOFC technology.
    keyword(s): Anodes , Fuels , Manufacturing , Solid oxide fuel cells , Electrolytes , Fracture (Materials) , Hydrogen AND Printing ,
    • Download: (642.0Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Cost-Effective Single Step Cofiring Process for Manufacturing Solid Oxide Fuel Cells Using HSC™ Anode

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/143659
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorKyung Joong Yoon
    contributor authorGuosheng Ye
    contributor authorSrikanth Gopalan
    contributor authorUday B. Pal
    date accessioned2017-05-09T00:38:34Z
    date available2017-05-09T00:38:34Z
    date copyrightApril, 2010
    date issued2010
    identifier issn2381-6872
    identifier otherJFCSAU-28941#021010_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143659
    description abstractThe anode-supported planar solid oxide fuel cell (SOFC) was fabricated by a cost-effective single step cofiring process using high shear compaction (HSC)™ anode substrate. The HSC™ process is a novel ceramic tape fabrication technique, which offers advantages in low-cost and high-volume production of the anode substrates over the conventional tape forming processes. The cell was comprised of a porous HSC™ Ni+8 mol % yttria-stabilized zirconia (YSZ) anode substrate, a porous Ni+YSZ anode barrier layer, a porous and fine-grained Ni+YSZ anode active layer, a dense YSZ electrolyte, a porous and fine-grained Ca-doped LaMnO3(LCM)+YSZ composite cathode active layer, and a porous LCM cathode current collector layer. The fabrication process involved wet powder spraying of the anode barrier layer over the HSC™ anode substrate followed by screen-printing of the remaining component layers. The cell was then cofired at 1340°C for 2 h. The microstructure and the open circuit voltage of the cell confirmed that the cell was crack-free and leak-tight. The cofired cell showed a stable and acceptable electrochemical performance at 800°C under humidified hydrogen (3–60% H2O) as fuel and air as oxidant. The anode active layer with finer and less porous microstructure increased the triple phase boundary length and improved cell performance under conditions that simulated higher fuel utilization. The material system and fabrication process presented in this work offers great advantage in low-cost and high-volume production of SOFCs, and it can be the basis for scale-up and successful commercialization of the SOFC technology.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleCost-Effective Single Step Cofiring Process for Manufacturing Solid Oxide Fuel Cells Using HSC™ Anode
    typeJournal Paper
    journal volume7
    journal issue2
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.3177449
    journal fristpage21010
    identifier eissn2381-6910
    keywordsAnodes
    keywordsFuels
    keywordsManufacturing
    keywordsSolid oxide fuel cells
    keywordsElectrolytes
    keywordsFracture (Materials)
    keywordsHydrogen AND Printing
    treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian