YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Modeling of a Methane Fuelled Direct Carbon Fuel Cell System

    Source: Journal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 006::page 61008
    Author:
    K. Hemmes
    ,
    M. Houwing
    ,
    N. Woudstra
    DOI: 10.1115/1.4001016
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Direct Carbon Fuel Cells (DCFCs) have great thermodynamic advantages over other high temperature fuel cells such as molten carbonate fuel cell (MCFC) and solid oxide fuel cell. They can have 100% fuel utilization, no Nernst loss (at the anode), and the CO2 produced at the anode is not mixed with other gases and is ready for re-use or sequestration. So far only studies have been reported on cell development. In this paper we study in particular the integration of the production of clean and reactive carbon particles from methane as a fuel for the direct carbon fuel cell. In the thermal decomposition process heat is upgraded to chemical energy in the carbon and hydrogen produced. The hydrogen is seen as a product as well as the power and heat. Under the assumptions given the net system electric efficiencies are 22.9% (based on methane lower heating value, LHV) and 20.7% (higher heating value, HHV). The hydrogen production efficiencies are 65.5% (based on methane LHV) and 59.1% (HHV), which leads to total system efficiencies of 88.4% (LHV) and 79.8% (HHV). Although a pure CO2 stream is produced at the anode outlet, which is seen as a large advantage of DCFC systems, this advantage is unfortunately reduced due to the need for CO2 in the cathode air stream. Due to the applied assumed constraint that the cathode outlet stream should at least contain 4% CO2 for the proper functioning of the cathode, similar to MCFC cathodes, a major part of the pure CO2 has to be mixed with incoming air. Further optimization of the DCFC and the system is needed to obtain a larger fraction of the output streams as pure CO2 for sequestration or re-use.
    keyword(s): Anodes , Fuels , Carbon , Modeling , Methane , Hydrogen , Direct carbon fuel cells AND Cycles ,
    • Download: (188.3Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Modeling of a Methane Fuelled Direct Carbon Fuel Cell System

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/143564
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorK. Hemmes
    contributor authorM. Houwing
    contributor authorN. Woudstra
    date accessioned2017-05-09T00:38:22Z
    date available2017-05-09T00:38:22Z
    date copyrightDecember, 2010
    date issued2010
    identifier issn2381-6872
    identifier otherJFCSAU-28945#061008_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143564
    description abstractDirect Carbon Fuel Cells (DCFCs) have great thermodynamic advantages over other high temperature fuel cells such as molten carbonate fuel cell (MCFC) and solid oxide fuel cell. They can have 100% fuel utilization, no Nernst loss (at the anode), and the CO2 produced at the anode is not mixed with other gases and is ready for re-use or sequestration. So far only studies have been reported on cell development. In this paper we study in particular the integration of the production of clean and reactive carbon particles from methane as a fuel for the direct carbon fuel cell. In the thermal decomposition process heat is upgraded to chemical energy in the carbon and hydrogen produced. The hydrogen is seen as a product as well as the power and heat. Under the assumptions given the net system electric efficiencies are 22.9% (based on methane lower heating value, LHV) and 20.7% (higher heating value, HHV). The hydrogen production efficiencies are 65.5% (based on methane LHV) and 59.1% (HHV), which leads to total system efficiencies of 88.4% (LHV) and 79.8% (HHV). Although a pure CO2 stream is produced at the anode outlet, which is seen as a large advantage of DCFC systems, this advantage is unfortunately reduced due to the need for CO2 in the cathode air stream. Due to the applied assumed constraint that the cathode outlet stream should at least contain 4% CO2 for the proper functioning of the cathode, similar to MCFC cathodes, a major part of the pure CO2 has to be mixed with incoming air. Further optimization of the DCFC and the system is needed to obtain a larger fraction of the output streams as pure CO2 for sequestration or re-use.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleModeling of a Methane Fuelled Direct Carbon Fuel Cell System
    typeJournal Paper
    journal volume7
    journal issue6
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.4001016
    journal fristpage61008
    identifier eissn2381-6910
    keywordsAnodes
    keywordsFuels
    keywordsCarbon
    keywordsModeling
    keywordsMethane
    keywordsHydrogen
    keywordsDirect carbon fuel cells AND Cycles
    treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 006
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian