Show simple item record

contributor authorYongseob Lim
contributor authorRavinder Venugopal
contributor authorA. Galip Ulsoy
date accessioned2017-05-09T00:37:05Z
date available2017-05-09T00:37:05Z
date copyrightJuly, 2010
date issued2010
identifier issn0022-0434
identifier otherJDSMAA-26525#041004_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/142850
description abstractThe binder force in sheet metal forming controls the material flow into the die cavity. Maintaining precise material flow characteristics is crucial for producing a high-quality stamped part. Process control can be used to adjust the binder force based on tracking of a reference punch force trajectory to improve part quality and consistency. The purpose of this paper is to present a systematic approach to the design and implementation of a suitable multi-input multi-output (MIMO) process controller. An appropriate process model structure for the purpose of controller design for the sheet metal forming process is presented and the parameter estimation for this model is accomplished using system identification methods. This paper is based on original experiments performed with a new variable blank holder force (or variable binder force) system that includes 12 hydraulic actuators to control the binder force. Experimental results from a complex-geometry part show that the MIMO process controller designed through simulation is effective.
publisherThe American Society of Mechanical Engineers (ASME)
titleMulti-Input Multi-Output (MIMO) Modeling and Control for Stamping
typeJournal Paper
journal volume132
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4001332
journal fristpage41004
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;2010:;volume( 132 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record