YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Mechanical Design
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Mechanical Design
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Development of a Simple Morphing Wing Using Elastomeric Composites as Skins and Actuators

    Source: Journal of Mechanical Design:;2009:;volume( 131 ):;issue: 009::page 91003
    Author:
    Larry D. Peel
    ,
    James Mejia
    ,
    Ben Narvaez
    ,
    Kyle Thompson
    ,
    Madhuri Lingala
    DOI: 10.1115/1.3159043
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Morphing wings are desired for their ability to reduce drag, to change flight characteristics, and perhaps to reduce weight by eliminating flap/aileron mechanisms. Development of two generations of a morphing wing project is documented. The work shows how a relatively low cost but realistic morphing wing test-bed can be fabricated. Wing skin, actuator, and actuator attachment development are discussed, as well as possible auxetic skin behavior. Aerodynamic characterization of the wing will be discussed in another paper. A very simple morphing wing was fabricated in generation one. The nose was able to elastically camber down approximately 25 deg and the tail 20 deg. Actuation was provided by three pneumatic “rubber muscle actuators” that produce high contractive/tensile forces. Upper and lower wing skins were fabricated from carbon fiber/polyurethane elastomer laminates. Lower skin buckling, actuator air leaks, and actuator attachment problems were resolved in the second generation. A finite element model of the second wing was developed and is being used to refine the morphing wing test-bed. The second wing fabrication methodology enabled smooth elastic cambering with no buckling or waviness in the skins. The nose cambered down 14 deg and the tail cambered down to 13 deg, and is capable of larger deformations. Improved leak-free biomimetic actuators and attach points now include no metal parts and have higher actuation forces due to new braided sheaths and functionally gradient matrix properties.
    keyword(s): Actuators , Wings AND Force ,
    • Download: (1.029Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Development of a Simple Morphing Wing Using Elastomeric Composites as Skins and Actuators

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/141325
    Collections
    • Journal of Mechanical Design

    Show full item record

    contributor authorLarry D. Peel
    contributor authorJames Mejia
    contributor authorBen Narvaez
    contributor authorKyle Thompson
    contributor authorMadhuri Lingala
    date accessioned2017-05-09T00:34:16Z
    date available2017-05-09T00:34:16Z
    date copyrightSeptember, 2009
    date issued2009
    identifier issn1050-0472
    identifier otherJMDEDB-27907#091003_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/141325
    description abstractMorphing wings are desired for their ability to reduce drag, to change flight characteristics, and perhaps to reduce weight by eliminating flap/aileron mechanisms. Development of two generations of a morphing wing project is documented. The work shows how a relatively low cost but realistic morphing wing test-bed can be fabricated. Wing skin, actuator, and actuator attachment development are discussed, as well as possible auxetic skin behavior. Aerodynamic characterization of the wing will be discussed in another paper. A very simple morphing wing was fabricated in generation one. The nose was able to elastically camber down approximately 25 deg and the tail 20 deg. Actuation was provided by three pneumatic “rubber muscle actuators” that produce high contractive/tensile forces. Upper and lower wing skins were fabricated from carbon fiber/polyurethane elastomer laminates. Lower skin buckling, actuator air leaks, and actuator attachment problems were resolved in the second generation. A finite element model of the second wing was developed and is being used to refine the morphing wing test-bed. The second wing fabrication methodology enabled smooth elastic cambering with no buckling or waviness in the skins. The nose cambered down 14 deg and the tail cambered down to 13 deg, and is capable of larger deformations. Improved leak-free biomimetic actuators and attach points now include no metal parts and have higher actuation forces due to new braided sheaths and functionally gradient matrix properties.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleDevelopment of a Simple Morphing Wing Using Elastomeric Composites as Skins and Actuators
    typeJournal Paper
    journal volume131
    journal issue9
    journal titleJournal of Mechanical Design
    identifier doi10.1115/1.3159043
    journal fristpage91003
    identifier eissn1528-9001
    keywordsActuators
    keywordsWings AND Force
    treeJournal of Mechanical Design:;2009:;volume( 131 ):;issue: 009
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian