YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Surface Scale Formation on Solid Oxide Fuel Cell Proximal Balance of Plant Components

    Source: Journal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 001::page 11018
    Author:
    Kirk Gerdes
    ,
    Christopher Johnson
    DOI: 10.1115/1.2971195
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Chromium containing alloys used as solid oxide fuel cell (SOFC) interconnects can generate volatile chrome species that deposit as Cr2O3(s) at the SOFC cathode/electrolyte interface under modest current densities (∼0.5 A/cm2). Deposition of chromic oxide at this interface increases overpotential losses, thereby degrading fuel cell performance and efficiency. Balance of plant components have not received attention as a chromium source but can produce volatile Cr species through direct thermal contact with the hot cell stack. In this work, materials representative of BoP component alloys were exposed to dry air at temperatures between 600°C and 800°C for 72 h. The material classes tested include austenitic steel, ferritic steel, alumina formers, silica formers, and a specialty ferritic with elevated alumina and silica content. The surface scales formed on each alloy were identified using X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Thin surface scales were formed that included Cr-, Fe-, Al-, and Si-oxides as well as Mn–Cr spinel. The surface composition estimated from the analytical data is used to thermodynamically calculate the abundance of volatile chromium species over the alloys. Using the calculated vapor composition and assumed rate efficiencies, it is possible to calculate the mass of Cr2O3 that will deposit on the SOFC surface. Up to 4.3 cm2 of SOFC active area can be deactivated in 2000 h of operation assuming a 1% efficiency of volatilization of chrome species and a 1% efficiency of deposition of Cr2O3. This is estimated to be approximately 5% of the starting active area of an ∼20 W SOFC. Degradation of SOFC performance is expected to scale almost linearly with stack size.
    keyword(s): Temperature , Vapors , Alloys , Solid oxide fuel cells , Industrial plants AND Incrustations ,
    • Download: (353.0Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Surface Scale Formation on Solid Oxide Fuel Cell Proximal Balance of Plant Components

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/140901
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorKirk Gerdes
    contributor authorChristopher Johnson
    date accessioned2017-05-09T00:33:30Z
    date available2017-05-09T00:33:30Z
    date copyrightFebruary, 2009
    date issued2009
    identifier issn2381-6872
    identifier otherJFCSAU-28936#011018_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140901
    description abstractChromium containing alloys used as solid oxide fuel cell (SOFC) interconnects can generate volatile chrome species that deposit as Cr2O3(s) at the SOFC cathode/electrolyte interface under modest current densities (∼0.5 A/cm2). Deposition of chromic oxide at this interface increases overpotential losses, thereby degrading fuel cell performance and efficiency. Balance of plant components have not received attention as a chromium source but can produce volatile Cr species through direct thermal contact with the hot cell stack. In this work, materials representative of BoP component alloys were exposed to dry air at temperatures between 600°C and 800°C for 72 h. The material classes tested include austenitic steel, ferritic steel, alumina formers, silica formers, and a specialty ferritic with elevated alumina and silica content. The surface scales formed on each alloy were identified using X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Thin surface scales were formed that included Cr-, Fe-, Al-, and Si-oxides as well as Mn–Cr spinel. The surface composition estimated from the analytical data is used to thermodynamically calculate the abundance of volatile chromium species over the alloys. Using the calculated vapor composition and assumed rate efficiencies, it is possible to calculate the mass of Cr2O3 that will deposit on the SOFC surface. Up to 4.3 cm2 of SOFC active area can be deactivated in 2000 h of operation assuming a 1% efficiency of volatilization of chrome species and a 1% efficiency of deposition of Cr2O3. This is estimated to be approximately 5% of the starting active area of an ∼20 W SOFC. Degradation of SOFC performance is expected to scale almost linearly with stack size.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleSurface Scale Formation on Solid Oxide Fuel Cell Proximal Balance of Plant Components
    typeJournal Paper
    journal volume6
    journal issue1
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2971195
    journal fristpage11018
    identifier eissn2381-6910
    keywordsTemperature
    keywordsVapors
    keywordsAlloys
    keywordsSolid oxide fuel cells
    keywordsIndustrial plants AND Incrustations
    treeJournal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian