YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Development and Simulation of an Innovative Planar Stack Design-Combining a Solid Oxide Fuel Cell (SOFC) With an Allothermal Steam Reformer

    Source: Journal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 004::page 41009
    Author:
    C. Schlitzberger
    ,
    R. Leithner
    ,
    H. Zindler
    DOI: 10.1115/1.3081472
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Increasing energy demands, limited resources, pollutants, and CO2-emissions caused by the use of fossil fuels require a more efficient and sustainable energy production. Due to their high electrical efficiencies as well as fuel and application flexibilities, high temperature fuel cells offer great potential to meet the demands of the future energy supply. The fuel gases hydrogen and carbon monoxide, which are electrochemically convertible in solid oxide fuel cells (SOFCs), have to be generated by reformation or gasification of hydrocarbons, or in the case of pure hydrogen, as fuel gas, by electrolysis. For these generating processes energy is required. This generally leads to a deterioration of SOFC-system efficiencies. At state of the art combined processes, the reformation or gasification reactor and the SOFC are usually separated. The heat required for the endothermic reforming is generated by partial oxidation (POx) of the supplied fuel or by using the waste heat of the exhaust gases. At the Institute for Heat- and Fuel-Technology of the Technische Universität Braunschweig, an innovative planar SOFC-stack-design with indirect internal reforming and without bipolar plates was developed. Due to the thermal and material couplings, the SOFC-waste heat can be directly used to supply the endothermic reforming process. Additionally, a part of the hot anode off-gas, consisting mainly of water vapor, is recycled as a reforming agent. Therefore, based on the principle of the chemical heat pump, depending on the fuel used, system efficiencies of more than 60% can be achieved, even though the SOFC itself reached only an electrical efficiency of approximately 50%. Additionally, due to the cascaded SOFC structure resulting in high fuel utilization, postcombustion of the waste gases is no longer necessary. Because of the SOFC membrane allowing only an oxygen-ion flow and thus representing an air separation unit and the SOFC design without the mixing of anode and cathode flows, a simple CO2-separation can be realized by condensing the water vapor out of the anode off-gas. Another advantage of the newly developed stack design is its parallel interconnection, which leads to higher reliability concerning single stack levels. The aim of the work was a first dimensioning of the new stack design for natural gas as a fuel and its energetical analysis concerning operation and feasibility. With the simulation program developed, the theoretical feasibility of the concept and a high electrical efficiency of about 60% were proven.
    keyword(s): Fuels , Design , Solid oxide fuel cells , Simulation AND Flow (Dynamics) ,
    • Download: (1.349Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Development and Simulation of an Innovative Planar Stack Design-Combining a Solid Oxide Fuel Cell (SOFC) With an Allothermal Steam Reformer

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/140815
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorC. Schlitzberger
    contributor authorR. Leithner
    contributor authorH. Zindler
    date accessioned2017-05-09T00:33:21Z
    date available2017-05-09T00:33:21Z
    date copyrightNovember, 2009
    date issued2009
    identifier issn2381-6872
    identifier otherJFCSAU-28939#041009_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/140815
    description abstractIncreasing energy demands, limited resources, pollutants, and CO2-emissions caused by the use of fossil fuels require a more efficient and sustainable energy production. Due to their high electrical efficiencies as well as fuel and application flexibilities, high temperature fuel cells offer great potential to meet the demands of the future energy supply. The fuel gases hydrogen and carbon monoxide, which are electrochemically convertible in solid oxide fuel cells (SOFCs), have to be generated by reformation or gasification of hydrocarbons, or in the case of pure hydrogen, as fuel gas, by electrolysis. For these generating processes energy is required. This generally leads to a deterioration of SOFC-system efficiencies. At state of the art combined processes, the reformation or gasification reactor and the SOFC are usually separated. The heat required for the endothermic reforming is generated by partial oxidation (POx) of the supplied fuel or by using the waste heat of the exhaust gases. At the Institute for Heat- and Fuel-Technology of the Technische Universität Braunschweig, an innovative planar SOFC-stack-design with indirect internal reforming and without bipolar plates was developed. Due to the thermal and material couplings, the SOFC-waste heat can be directly used to supply the endothermic reforming process. Additionally, a part of the hot anode off-gas, consisting mainly of water vapor, is recycled as a reforming agent. Therefore, based on the principle of the chemical heat pump, depending on the fuel used, system efficiencies of more than 60% can be achieved, even though the SOFC itself reached only an electrical efficiency of approximately 50%. Additionally, due to the cascaded SOFC structure resulting in high fuel utilization, postcombustion of the waste gases is no longer necessary. Because of the SOFC membrane allowing only an oxygen-ion flow and thus representing an air separation unit and the SOFC design without the mixing of anode and cathode flows, a simple CO2-separation can be realized by condensing the water vapor out of the anode off-gas. Another advantage of the newly developed stack design is its parallel interconnection, which leads to higher reliability concerning single stack levels. The aim of the work was a first dimensioning of the new stack design for natural gas as a fuel and its energetical analysis concerning operation and feasibility. With the simulation program developed, the theoretical feasibility of the concept and a high electrical efficiency of about 60% were proven.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleDevelopment and Simulation of an Innovative Planar Stack Design-Combining a Solid Oxide Fuel Cell (SOFC) With an Allothermal Steam Reformer
    typeJournal Paper
    journal volume6
    journal issue4
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.3081472
    journal fristpage41009
    identifier eissn2381-6910
    keywordsFuels
    keywordsDesign
    keywordsSolid oxide fuel cells
    keywordsSimulation AND Flow (Dynamics)
    treeJournal of Fuel Cell Science and Technology:;2009:;volume( 006 ):;issue: 004
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian