YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Ag–Cu–Ti Braze Materials for Sealing SOFCs

    Source: Journal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 001::page 11002
    Author:
    Worawarit Kobsiriphat
    ,
    Scott Barnett
    DOI: 10.1115/1.2784279
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Two Ag–Cu–Ti brazing alloy compositions were studied as gas seals for solid oxide fuel cells (SOFCs). Yttria-stabilized zirconia pellets were bonded using Ag–35.25Cu–1.75Ti (Cusil-ABA) or Ag–20.1Cu–1.0Ti (average composition; Ag-Cusil). Both as-brazed filler metals contained metallic Ag and Cu phases, along with continuous titanium oxide layers at the filler metal-zirconia interfaces. The brazed joints were then aged at 700°C for up to 100h in air or while separating H2 and air atmospheres. After annealing in air for 100h at 700°C, degradation in microstructure and hermeticity was more pronounced in Cusil-ABA. However, in H2-air atmosphere, Cusil-ABA performed better than Ag-Cusil. Ag-Cusil aged in H2 air delaminated from zirconia and its microstructure showed large interconnected pores in Ag-rich regions. The results were confirmed by single-cell tests using each filler metal as a gas seal. Observations of the post-test Cusil-ABA microstructure revealed little degradation. These results indicate that Cusil-ABA is better suited than Ag-Cusil as a SOFC gas seal.
    keyword(s): Sealing (Process) , Brazing , Solid oxide fuel cells , Filler metals , Titanium , Metals , Fillers (Materials) AND Pressure ,
    • Download: (1.095Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Ag–Cu–Ti Braze Materials for Sealing SOFCs

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/138371
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorWorawarit Kobsiriphat
    contributor authorScott Barnett
    date accessioned2017-05-09T00:28:44Z
    date available2017-05-09T00:28:44Z
    date copyrightFebruary, 2008
    date issued2008
    identifier issn2381-6872
    identifier otherJFCSAU-28932#011002_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138371
    description abstractTwo Ag–Cu–Ti brazing alloy compositions were studied as gas seals for solid oxide fuel cells (SOFCs). Yttria-stabilized zirconia pellets were bonded using Ag–35.25Cu–1.75Ti (Cusil-ABA) or Ag–20.1Cu–1.0Ti (average composition; Ag-Cusil). Both as-brazed filler metals contained metallic Ag and Cu phases, along with continuous titanium oxide layers at the filler metal-zirconia interfaces. The brazed joints were then aged at 700°C for up to 100h in air or while separating H2 and air atmospheres. After annealing in air for 100h at 700°C, degradation in microstructure and hermeticity was more pronounced in Cusil-ABA. However, in H2-air atmosphere, Cusil-ABA performed better than Ag-Cusil. Ag-Cusil aged in H2 air delaminated from zirconia and its microstructure showed large interconnected pores in Ag-rich regions. The results were confirmed by single-cell tests using each filler metal as a gas seal. Observations of the post-test Cusil-ABA microstructure revealed little degradation. These results indicate that Cusil-ABA is better suited than Ag-Cusil as a SOFC gas seal.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleAg–Cu–Ti Braze Materials for Sealing SOFCs
    typeJournal Paper
    journal volume5
    journal issue1
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2784279
    journal fristpage11002
    identifier eissn2381-6910
    keywordsSealing (Process)
    keywordsBrazing
    keywordsSolid oxide fuel cells
    keywordsFiller metals
    keywordsTitanium
    keywordsMetals
    keywordsFillers (Materials) AND Pressure
    treeJournal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian