YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Fuel Cell Science and Technology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Diesel Steam Reforming for PEM Fuel Cells

    Source: Journal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 002::page 21005
    Author:
    Christian Mengel
    ,
    Martin Konrad
    ,
    Roland Wruck
    ,
    Klaus Lucka
    ,
    Heinrich Köhne
    DOI: 10.1115/1.2784313
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: Different applications for the decentralized stationary or mobile power supply require the usage of liquid hydrocarbons such as fuel oil, diesel, or gas oil in fuel cell systems. Reducing the sulfur content of conventional liquid fuels such as diesel or gasoline below 10ppm, the usage of these fuels in fuel cell applications becomes increasingly promising. The first process step represents thereby the reforming, which can be carried out in different ways. One of the commonly favored gas process technologies is the steam reforming process, which is state of the art for natural gas applications. Using a proton exchange membrane (PEM) fuel cell requires a complex gas cleanup system. Using a pressurized steam reforming process offers a significant reduction of the whole system size by efficiently compressing the liquid educts. Complete PEM systems with steam reformers tend to have a higher efficiency than, for example, systems using the autothermal reforming process. Advanced diesel steam reformers for industrialization still have to be developed and improved. The Oel-Wärme-Institut gGmbH has successfully carried out research on steam reforming with variations of important parameters using a sulfur free reference fuel and desulfurized diesel. During the experiments, several parameters such as steam to carbon ratio, reformer inlet temperatures, catalysts, and fuels were varied. While running the process, a continuous product gas measurement was taken. The reformer is equipped with several thermocouples. Three of them are moveable to measure the temperature profile of the catalyst. The experiments show that product gas concentrations reach a nearly equilibrium concentration with reformer inlet temperatures ϑ>700°C of a reference fuel∕steam mixture. Hydrogen concentrations over 70% were feasible. Constant inlet temperatures of ϑ=850°C and a variation of the steam to carbon ratio only have a noticeable effect on the water gas shift equilibrium. After all experiments, carbon deposits were found in the steam reformer system and under some circumstances on the catalysts. Experiments with operating times of more than 20h were performed at a steam to carbon ratio of 4.5. The application of continuously desulfurized diesel fuel indicates a degradation of the catalyst after a few hours. For the overall system design of PEM fuel cell applications, an operation mode at a reduced steam to carbon ratio has to be developed.
    keyword(s): Temperature , Fuels , Diesel , Proton exchange membrane fuel cells , Steam reforming , Catalysts , Sulfur AND Hydrogen ,
    • Download: (514.3Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Diesel Steam Reforming for PEM Fuel Cells

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/138357
    Collections
    • Journal of Fuel Cell Science and Technology

    Show full item record

    contributor authorChristian Mengel
    contributor authorMartin Konrad
    contributor authorRoland Wruck
    contributor authorKlaus Lucka
    contributor authorHeinrich Köhne
    date accessioned2017-05-09T00:28:43Z
    date available2017-05-09T00:28:43Z
    date copyrightMay, 2008
    date issued2008
    identifier issn2381-6872
    identifier otherJFCSAU-28933#021005_1.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/138357
    description abstractDifferent applications for the decentralized stationary or mobile power supply require the usage of liquid hydrocarbons such as fuel oil, diesel, or gas oil in fuel cell systems. Reducing the sulfur content of conventional liquid fuels such as diesel or gasoline below 10ppm, the usage of these fuels in fuel cell applications becomes increasingly promising. The first process step represents thereby the reforming, which can be carried out in different ways. One of the commonly favored gas process technologies is the steam reforming process, which is state of the art for natural gas applications. Using a proton exchange membrane (PEM) fuel cell requires a complex gas cleanup system. Using a pressurized steam reforming process offers a significant reduction of the whole system size by efficiently compressing the liquid educts. Complete PEM systems with steam reformers tend to have a higher efficiency than, for example, systems using the autothermal reforming process. Advanced diesel steam reformers for industrialization still have to be developed and improved. The Oel-Wärme-Institut gGmbH has successfully carried out research on steam reforming with variations of important parameters using a sulfur free reference fuel and desulfurized diesel. During the experiments, several parameters such as steam to carbon ratio, reformer inlet temperatures, catalysts, and fuels were varied. While running the process, a continuous product gas measurement was taken. The reformer is equipped with several thermocouples. Three of them are moveable to measure the temperature profile of the catalyst. The experiments show that product gas concentrations reach a nearly equilibrium concentration with reformer inlet temperatures ϑ>700°C of a reference fuel∕steam mixture. Hydrogen concentrations over 70% were feasible. Constant inlet temperatures of ϑ=850°C and a variation of the steam to carbon ratio only have a noticeable effect on the water gas shift equilibrium. After all experiments, carbon deposits were found in the steam reformer system and under some circumstances on the catalysts. Experiments with operating times of more than 20h were performed at a steam to carbon ratio of 4.5. The application of continuously desulfurized diesel fuel indicates a degradation of the catalyst after a few hours. For the overall system design of PEM fuel cell applications, an operation mode at a reduced steam to carbon ratio has to be developed.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleDiesel Steam Reforming for PEM Fuel Cells
    typeJournal Paper
    journal volume5
    journal issue2
    journal titleJournal of Fuel Cell Science and Technology
    identifier doi10.1115/1.2784313
    journal fristpage21005
    identifier eissn2381-6910
    keywordsTemperature
    keywordsFuels
    keywordsDiesel
    keywordsProton exchange membrane fuel cells
    keywordsSteam reforming
    keywordsCatalysts
    keywordsSulfur AND Hydrogen
    treeJournal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian